Muffler options
#1
Instructor
Thread Starter
Join Date: May 2016
Location: Bloomfield Hills, MI
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Muffler options
I researched this topic but found nothing really compelling. The tail pipe on the current muffler is rusted through near where it joins the muffler and makes an annoying puttering sound, and the muffler doesn't sound right, either. My questions:
1. What are good replacements for a stock looking muffler? I measured the current muffler at 18" body length 9.75" wide and about 6" tall. The circumference of the ovalish/roundish muffler body is 24"
2. What is a good replacement for the black anodized tailpipe that looks stock?
I am open to different sounds, but prefer lower tones, not raspy. It looks like I have the original pipes and cat backs going to what looks like an original muffler. Thanks for any help.
1. What are good replacements for a stock looking muffler? I measured the current muffler at 18" body length 9.75" wide and about 6" tall. The circumference of the ovalish/roundish muffler body is 24"
2. What is a good replacement for the black anodized tailpipe that looks stock?
I am open to different sounds, but prefer lower tones, not raspy. It looks like I have the original pipes and cat backs going to what looks like an original muffler. Thanks for any help.
#5
Rainman
Rennlist Member
Rennlist Member
center/center is closest to 951
but you might check with this guy if its still available.
http://forums.pelicanparts.com/porsc...w-muffler.html
but you might check with this guy if its still available.
http://forums.pelicanparts.com/porsc...w-muffler.html