Needing used/healthy k26-8
#1
Three Wheelin'
Thread Starter
Needing used/healthy k26-8
Anybody have a used healthy K26-8 needing rebuild? I'm taking off my k26-6 with foreign body damage on my 951, might as well go to the factory replacement for the "S". Thank you
#4
Three Wheelin'
Thread Starter
Thank you Auto Werks 3.6, but thats too hot for my otherwise stock engine. Thank you anyway
Stephencs601 sent you PM.
thank you
Stephencs601 sent you PM.
thank you
Last edited by ttAmerica RoadsterAWD; 01-29-2018 at 11:31 PM. Reason: correction needed
#6
Quit Smokin'
Rennlist Member
Rennlist Member
My turbo will really shine on a stock engine... before I installed the m-tune I did 300 rwhp on stock injectors, stock AFM with modified j boot , and an old school lindsey racing chip. As a bonus it spools faster than a k26-6.
#7
Rennlist Member
You don't need to chip the car to use a k26-8 I had it on mine and it was awesome. Now I have a crazy setup and lots of suspension work. I can spin the rims off the tires if I hit it too hard too long. But it is the suspension work that makes the car. Power is great, but if you can't hit corners hard, it doesn't matter how much power you have. Give me a day or so to pull the Turbo out. I have a shed dedicated to parts and stuff.