lart951

sale is over but I have a 3L that is going to be parted soon see post # 6 on this thread

gruhsy

LOL. Your no longer "Parting" now "Harvesting"

audisport

Hello, I see you have a M Tune kit on the site. Any chance you'd sell this separate from the KLR/DME?

I already have working units in my 89.

lart951

I’ll pm you shortly

fejjj

Tee hee

lart951

Engine-
88mm crank
7:5:1 JE pistons
Oil pan baffle
104mm bore with darton sleeves
Pauter rods
49mm intake valves
Race springs and retainers (bf racing)
Race cam (bf racing
Upgraded intake manifold (SFR)
Front mount intercooler (SFR)
Custom fuel rail
1000cc injectors (Bosh)
3 bar FPR
custom fuel rail
Larts fuel lines
Tial 44mm WG
6262 turbo charger
Lindsey 3 inch turbo back
4 inch bf muffler
Forge diverter valve
Electromotive Tec’ s engine management
90 percent of the vacuum lines are duel walled
Profec b spec 2 EBC
Ported and polished head
MLS HG
Vented catch can
Max bore throttle body
Nissan quest alternator upgrade
all brand new belts including timing and balance shaft
Suspension/ brakes
All new Zimmerman drilled rotors
All new hawk hps pads (front) possible stop tech in the rear
968 front sway bar
E brake shoes have under 3,000miles
Koni yellows
Rennbay solid ball joint kit (new)
Elephant racing sport caster blocks and control arm bushing (front, brand new)
Brand new brake master cylinder
Alignment done this year 2017
Transmission
LSD
Spec stage 2+ hybrid clutch (under 1K miles$
Aluminum pressure plate (under 1K miles)
Aluminum fly wheel (under 1K miles)
Have 90 percent left front and rear
275/35/18 225/30/18 Bridgestone potenzas on Italian made reps Carrera light weights. Perfect condition
BF racing fiberglass front bumper
Vented header panel
924 CGT hood scoop
Interior
Burgundy color
Black Recaro seats
Pioneer radio 8200bt little old now
Front door speakers are Hybrid mirus
Memphis 4 channel amp
Shelby remote start
Innovative air fuel gauge LC-2
Boost gauge

gpr8er

wow...what a saga. Lots of nice bits there.

lart951

Engine was tuned by Chris White

Humboldtgrin

Now that's depressing, all that work and time spent building that car... I don't have any $$$ for any of the parts off of it.

shortyboy

PM sent on intake and clutch items

Voith

That car could be nicknamed Lucky.

lart951

will be doing a last glory run video and Thursday it will be parted

Engine-
88mm crank
7:5:1 JE pistons
Oil pan baffle
104mm bore with darton sleeves
Pauter rods
49mm intake valves
Race springs and retainers (bf racing)
Race cam (bf racing
Upgraded intake manifold (SFR)
Front mount intercooler (SFR)
Custom fuel rail
1000cc injectors (Bosh)
3 bar FPR
custom fuel rail
Larts fuel lines
Tial 44mm WG
6262 turbo charger
Lindsey 3 inch turbo back
4 inch bf muffler
Forge diverter valve
Electromotive Tec’ s engine management
90 percent of the vacuum lines are duel walled
Profec b spec 2 EBC
Ported and polished head
MLS HG
Vented catch can
Max bore throttle body
Nissan quest alternator upgrade
all brand new belts including timing and balance shaft

Suspension/ brakes
All new Zimmerman drilled rotors
All new hawk hps pads (front) possible stop tech in the rear
968 front sway bar
E brake shoes have under 3,000miles
Koni yellows
Renn bay solid ball joint kit (new)
Elephant racing sport caster blocks and control arm bushing (front, brand new)
Brand new brake master cylinder
Alignment done this year 2017

Transmission
LSD
Spec stage 2+ hybrid clutch (under 1K miles$
Aluminum pressure plate (under 1K miles)
Aluminum fly wheel (under 1K miles)

Also have custom axels and custom joints brand new in the box with trans brace brand new

Have 90 percent left front and rear
275/35/18 225/30/18 Bridgestone potenzas on Italian made reps Carrera light weights. Perfect condition

BF racing fiberglass front bumper

Vented header panel

924 CGT hood scoop

Interior

Burgundy color

Inside roof and panels are black vinyl

Black Recaro seats removed 5 point harness

Pioneer radio 8200bt little old now

Front door speakers are Hybrid mirus

Memphis 4 channel amp

Shelby remote start

Innovative air fuel gauge LC-2

Boost gauge

gpr8er

[QUOTE=lart951;14602517]will be doing a last glory run video and Thursday it will be parted

can't wait to see the video. Are you going to part the motor out or sell as a whole?

lart951

[quote=gpr8er;14605507]yes, that's the goal is such a solid engine




The boys already started

intrepidagent