Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   944 Turbo and Turbo-S Forum (https://rennlist.com/forums/944-turbo-and-turbo-s-forum-72/)
-   -   Garage Sale - Lots of new and used parts (https://rennlist.com/forums/944-turbo-and-turbo-s-forum/1043687-garage-sale-lots-of-new-and-used-parts.html)

fast951 01-17-2018 07:57 PM

Garage Sale - Lots of new and used parts
 
After spending years collecting parts, I’m out of room. It’s time to clean the storage, and let someone else use these parts. Item description will state if it’s a brand new or used. Some items are too bulky to package and ship, so I prefer a local pickup (for now). If you think a price is way off, either direction too high or too low, please drop me a note. All prices are OBO - shoot me a reasonable offer.

Items are listed here first, giving RennListers a first choice. Items not sold in a timely manner, will be listed elsewhere. All items remain for sale till paid for. Sorry, will not hold an item while you think about it. First person to pay gets the item. If you want an item, drop me an email do not post here. I will reply in the order emails are received.

These are my personal items. Shipping and any additional transaction fees are to be paid by the buyer.

Suspensions & Brakes
  • 951/944S2/968/928 (NEW PORSCHE original) Big Blacks front brake rotors with 964 Turbo 3.6 drilled rotors: $2400 (Retails close to $3000)
  • 951 MY87 late offset hubs/spindles rear arms (USED) – items to be used to convert an early offset car to the late offset: $500
Engine
  • 3L 968 crankshaft (USED) – One slightly damaged rod-bearing surface. Fix or use for an offset grind stroker: $500
  • 3L crankshaft (USED) – Good condition: $1000
  • 944S 16V TURBO forged pistons & rings set (NEW Wossner) – 8:1 CR to be used with a 2.5L Alusil block: $650 (Retails for $1000)
  • 944S engine (USED) – Engine was disassembled for inspection – perfect cylinder walls. The plan was to build a 16V turbo engine, but plans have changed. Local Pickup Only : $1000- 944S engine and Turbo pistons if purchased together $1500
  • 951 8V 3L Forged Pistons and rings set (NEW Ross) – 8:1 CR - to be used with sleeved (not Alusil) 104mm and 3L crank. Needed to build a 3L 8V turbo engine. : $600 (Retails around $900)
  • *** 968 Cylinder Head (USED - cams not included but available): $800
  • *** 951/944S2/968/944 Carrillo rods (4 USED): $500
  • *** 944S2 3L (104mm more) - needs to be sleeved :$300 (local pickup)
  • *** 951 dry sleeved block - big bore - minor crack in aluminum around 1 sleeve . 2 machinists claim it can be used as the sleeves are fairly thick. Cost to sleeve was $1200, not used since. Build it, pull sleeves, or??? Selling cheap: $200 (local pickup)
Transaxle
  • 951-5spd transaxle with LSD (USED) – Came off of a streetcar with around 70K miles.. Prefer a local pickup, but will put on a wooden palette if you arrange the shipping: $1600
  • 968 6spd with Porsche Motor sport LSD (USED) – Purchased years ago and stored, a new Porsche Motor sport LSD was purchased out of Germany to replace the Torsen LSD. In excellent condition with very low miles. Prefer a local pickup, but will put on a wooden palette if you arrange the shipping: $4200
    (shifter linkage/rod, special 968 half shaft axle, torque tube and bell sousing available at an extra cost).
Wheels
Both sets of wheels are for Late offset cars. for MY87+: 951/944/944S2/968/928S4; MY89+: 964, 993, 996, Boxster
  • Porsche Sport Classic II Porsche original Wheels - Two-Piece design (USED) – Late Offset 18x8 and 18x10 ET52 for late offset cars – straight, but with minor imperfections: $1200
  • 951 late offset BBS LM Replica Wheels - Two-Piece design (NEW) – Late Offset8.5x18 ET48 & 10x18 ET52: $900
Items to be added shortly (trying to figure out a reasonable price. If you have an idea, drop me a note)
  • 951 3” SS cat bypass and cat back exhaust (from downpipe back) (USED – FabSpeed)
  • 951S (Turbo S) Spindles & Hubs- 951S (Turbo S) Spindles/hubs with Racers Edge Billet hubs and Charlie A-Arms with both standard and long pins
  • 951 16V turbo custom intake manifold (Used - will be available once 16V heads sell)
  • 951-8V custom intake manifold (NEW). JME Intake runners, custom manifold. All the pieces to build a very hi flowing and efficient intake manifold. A must for high HP 8V engine.
  • 951 6-puck clutch disk (NEW)
  • 951 Fidanza Flywheel (NEW)
  • 951/944 104mm Copper head gasket (NEW)

MAGK944 01-17-2018 10:26 PM


Originally Posted by fast951 (Post 14737484)
951S (Turbo S) Spindles & Hubs- 951S (Turbo S) Spindles/hubs with Racers Edge Billet hubs and Charlie A-Arms.

Interested in this when you post a price.

FHMotorsport 01-18-2018 01:04 AM

Emailed.

fast951 01-18-2018 12:58 PM


Originally Posted by MAGK944 (Post 14737802)


Interested in this when you post a price.

Noted, thanks. It may be a short while on these as I figure out the next step for my track car...

fast951 01-18-2018 01:00 PM


Originally Posted by FHMotorsport (Post 14738108)
Emailed.

Replied, thanks.

Auto_Werks 3.6 01-18-2018 09:45 PM

John,
could you send or post pictures of the 3L cranks, and the 3L pistons for 104 sleeved bore?

Also interested in the intake manifold parts.
Thanks!

FTW 01-18-2018 10:53 PM

Interested in the exhaust. Price including shipping to Tigard Oregon 97224

fast951 01-19-2018 07:27 PM

https://cimg3.ibsrv.net/gimg/rennlis...f2f402b31f.jpg

Ross 104mm piston.

fast951 01-19-2018 07:29 PM


Originally Posted by Auto_Werks 3.6 (Post 14740053)
John,
could you send or post pictures of the 3L cranks, and the 3L pistons for 104 sleeved bore?

Also interested in the intake manifold parts.
Thanks!

Picture of piston posted.

fast951 01-19-2018 07:36 PM

https://cimg8.ibsrv.net/gimg/rennlis...5fb4161b75.jpg

Sport Classic II - factory 2-piece

(wheels need washing, been in storage for over 15 years)

fast951 01-19-2018 07:50 PM

https://cimg0.ibsrv.net/gimg/rennlis...1f65a07bcf.jpg

Big Blackshttps://cimg7.ibsrv.net/gimg/rennlis...e72963ec40.jpg
and front rotors

Black51 01-20-2018 02:17 PM

Interested in the sledgehammer head.

Robert_325i 01-22-2018 01:59 PM

Interested in this:
  • 951 3” SS cat bypass and exhaust (USED – FabSpeed)

TheAllusionist 01-23-2018 02:00 AM

Curious about sledgehammer head.

fast951 01-25-2018 08:25 PM

Most sold items shipped already.

If you are serious wanting a part, it's best to email me directly so I can keep track of the order inquiries came in.


All times are GMT -3. The time now is 03:50 AM.


© 2018 MH Sub I, LLC dba Internet Brands