3.L Turbo soon to be Parted
sale is over but I have a 3L that is going to be parted soon see post # 6 on this thread
|
LOL. Your no longer "Parting" now "Harvesting" :roflmao:
|
Hello, I see you have a M Tune kit on the site. Any chance you'd sell this separate from the KLR/DME?
I already have working units in my 89. |
Originally Posted by audisport
(Post 14568919)
Hello, I see you have a M Tune kit on the site. Any chance you'd sell this separate from the KLR/DME?
I already have working units in my 89. |
Originally Posted by gruhsy
(Post 14563986)
LOL. Your no longer "Parting" now "Harvesting" :roflmao:
|
3.L Turbo soon to be Parted
6 Attachment(s)
Engine-
88mm crank 7:5:1 JE pistons Oil pan baffle 104mm bore with darton sleeves Pauter rods 49mm intake valves Race springs and retainers (bf racing) Race cam (bf racing Upgraded intake manifold (SFR) Front mount intercooler (SFR) Custom fuel rail 1000cc injectors (Bosh) 3 bar FPR custom fuel rail Larts fuel lines Tial 44mm WG 6262 turbo charger Lindsey 3 inch turbo back 4 inch bf muffler Forge diverter valve Electromotive Tec’ s engine management 90 percent of the vacuum lines are duel walled Profec b spec 2 EBC Ported and polished head MLS HG Vented catch can Max bore throttle body Nissan quest alternator upgrade all brand new belts including timing and balance shaft Suspension/ brakes All new Zimmerman drilled rotors All new hawk hps pads (front) possible stop tech in the rear 968 front sway bar E brake shoes have under 3,000miles Koni yellows Rennbay solid ball joint kit (new) Elephant racing sport caster blocks and control arm bushing (front, brand new) Brand new brake master cylinder Alignment done this year 2017 Transmission LSD Spec stage 2+ hybrid clutch (under 1K miles$ Aluminum pressure plate (under 1K miles) Aluminum fly wheel (under 1K miles) Have 90 percent left front and rear 275/35/18 225/30/18 Bridgestone potenzas on Italian made reps Carrera light weights. Perfect condition BF racing fiberglass front bumper Vented header panel 924 CGT hood scoop Interior Burgundy color Black Recaro seats Pioneer radio 8200bt little old now Front door speakers are Hybrid mirus Memphis 4 channel amp Shelby remote start Innovative air fuel gauge LC-2 Boost gauge |
wow...what a saga. Lots of nice bits there.
|
Originally Posted by gpr8er
(Post 14573656)
wow...what a saga. Lots of nice bits there.
|
Now that's depressing, all that work and time spent building that car... I don't have any $$$ for any of the parts off of it.
|
PM sent on intake and clutch items
|
That car could be nicknamed Lucky.
|
3 Attachment(s)
will be doing a last glory run video and Thursday it will be parted
Engine- 88mm crank 7:5:1 JE pistons Oil pan baffle 104mm bore with darton sleeves Pauter rods 49mm intake valves Race springs and retainers (bf racing) Race cam (bf racing Upgraded intake manifold (SFR) Front mount intercooler (SFR) Custom fuel rail 1000cc injectors (Bosh) 3 bar FPR custom fuel rail Larts fuel lines Tial 44mm WG 6262 turbo charger Lindsey 3 inch turbo back 4 inch bf muffler Forge diverter valve Electromotive Tec’ s engine management 90 percent of the vacuum lines are duel walled Profec b spec 2 EBC Ported and polished head MLS HG Vented catch can Max bore throttle body Nissan quest alternator upgrade all brand new belts including timing and balance shaft Suspension/ brakes All new Zimmerman drilled rotors All new hawk hps pads (front) possible stop tech in the rear 968 front sway bar E brake shoes have under 3,000miles Koni yellows Renn bay solid ball joint kit (new) Elephant racing sport caster blocks and control arm bushing (front, brand new) Brand new brake master cylinder Alignment done this year 2017 Transmission LSD Spec stage 2+ hybrid clutch (under 1K miles$ Aluminum pressure plate (under 1K miles) Aluminum fly wheel (under 1K miles) Also have custom axels and custom joints brand new in the box with trans brace brand new Have 90 percent left front and rear 275/35/18 225/30/18 Bridgestone potenzas on Italian made reps Carrera light weights. Perfect condition BF racing fiberglass front bumper Vented header panel 924 CGT hood scoop Interior Burgundy color Inside roof and panels are black vinyl Black Recaro seats removed 5 point harness Pioneer radio 8200bt little old now Front door speakers are Hybrid mirus Memphis 4 channel amp Shelby remote start Innovative air fuel gauge LC-2 Boost gauge |
[QUOTE=lart951;14602517]will be doing a last glory run video and Thursday it will be parted
can't wait to see the video. Are you going to part the motor out or sell as a whole? |
3 Attachment(s)
[quote=gpr8er;14605507]
Originally Posted by lart951
(Post 14602517)
will be doing a last glory run video and Thursday it will be parted
can't wait to see the video. Are you going to part the motor out or sell as a whole? The boys already started |
Originally Posted by gruhsy
(Post 14563986)
LOL. Your no longer "Parting" now "Harvesting" :roflmao:
https://cimg4.ibsrv.net/gimg/rennlis...ce4c001452.jpg |
All times are GMT -3. The time now is 11:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands