nine7one

Well, still trying to figure out why my 944 won't start. (turns over, no tach bounce, etc) I've replaced the DME, speed and reference sensors and it still won't start. Also there's no signal whatsoever at the DME. I'm at my wits-end. Any ideas where I should turn next. Any help is greatly appreciated.

mel_t_vin

Suspect either (1) faulty wiring/connectors for the S&R sensors on the harness side, or (2) improper gapping of S&R sensors [inhibiting proper signal to DME].

thomasmryan

Test the continuity from the speed and reference sensor plugs to the DME. The under hood plastic gets brittle it may have pushed the wires back in the connector.

nine7one

Thanks that's a good idea.