What have you done to your 944 S2 Cabriolet?
#91
Burning Brakes
Join Date: Dec 2009
Location: Montreal, Quebec, Canada
Posts: 1,045
Received 0 Likes
on
0 Posts
Last 2 weeks got my airbag controller changed reset the system with Durametric software/cable and finally the airbag system now works fine.
PASSED INSPECTION and plated the car!!!
Installed a Sub in trunk and new door speakers
Detailed the whole thing
Planned for next 3 weeks:
Change cruise computer (AGAIN )
Clean AFM and check all vacuum hoses to attempt to fix warm idle surge
Install glove box arm repair kit
Install new door handle seals for drivers door (Mine are missing)
Replace dome light with new one
etc.
PASSED INSPECTION and plated the car!!!
Installed a Sub in trunk and new door speakers
Detailed the whole thing
Planned for next 3 weeks:
Change cruise computer (AGAIN )
Clean AFM and check all vacuum hoses to attempt to fix warm idle surge
Install glove box arm repair kit
Install new door handle seals for drivers door (Mine are missing)
Replace dome light with new one
etc.
#92
Burning Brakes
Join Date: Dec 2009
Location: Montreal, Quebec, Canada
Posts: 1,045
Received 0 Likes
on
0 Posts
Am I the only one posting to this thread!!
Finished all in the above list over the last few weeks
DROVE IT ALL WEEK LAST WEEK YAHOOO
Idle problem got worse so I followed some members advice and took out the ISV today and cleaned it, cleaned the throttle body, cleaned all of the electrical connectors for the ISV, TPS and AFM. Reinstalled and tightened all of the hose clamps.
Seems to have fixed the problem
Finished all in the above list over the last few weeks
DROVE IT ALL WEEK LAST WEEK YAHOOO
Idle problem got worse so I followed some members advice and took out the ISV today and cleaned it, cleaned the throttle body, cleaned all of the electrical connectors for the ISV, TPS and AFM. Reinstalled and tightened all of the hose clamps.
Seems to have fixed the problem
#95
#97
Instructor
Join Date: Nov 2009
Location: columbus Ohio
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
My new S2 Cab
Finally got it out of the garage and just finished wet sanding and buffing. Below are some pics. Next is a few minor thing on the interior the to the engine compartment.
#98
Instructor
Join Date: Nov 2009
Location: columbus Ohio
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
any body know how much difference the angle on the windshield is on a cab vs. a coupe. additionally may think about a DE event this summer but have been told I need a rollbar. I want one that can be bolted in quickly and removes as I have several grandchildren who like to ride in the back seat of Papa's car
#99
Instructor
Join Date: Nov 2009
Location: columbus Ohio
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
For anybody in Ohio I was able to get the Collector plates for this car. Don't know if it was worth the trouble as the state was nor very easy to work with. Mine was #1461 of just over 3,000 imported to the US. Anybody know how many are still out there?
#102
Instructor
Thread Starter
tomv, I think it was on page 4 of this thread. jsaindc put one in his cab. You may want to shoot him a pm.
#103