944 S2 shop manual
#1
Instructor
Thread Starter
Join Date: Apr 2005
Location: Minneapolis
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
944 S2 shop manual
I was wondering if anyone had an up-to-date (i.e. including all the technical buklletins) shop manual for the late 944 S2 etc.
I enquired to the dealer and they said there is a limited run printing of the manual is available for $400.00
It's difficult to do what I need to do on the car without the manual and Bentley doesnt have a manual for the late 944s.
What are my alternatives??
TIA!
I enquired to the dealer and they said there is a limited run printing of the manual is available for $400.00
It's difficult to do what I need to do on the car without the manual and Bentley doesnt have a manual for the late 944s.
What are my alternatives??
TIA!
#2
Addict
Rennlist Member
Rennlist Member
The S2 is covered in the Factory Workshop Manual set. DEVEK has the manual for $219.00 til the end of this week. I just bought the turbo supplement from them and they were good to deal with. There's a thread on the main 924/44/51/68 forum here on rennlist. I got the set from MY Porsche in Carmel, CA a few months ago for about the same price. I'd been looking for a "deal" for over a year - $219.00 is lower than a lot of the used ones were going for.
and... BTW... You SOOOOOOO WANT a manual for these cars! EVERYTHING is a LOT easier and you will feel confident knowing you've torqued to spec and done the job right!
and... BTW... You SOOOOOOO WANT a manual for these cars! EVERYTHING is a LOT easier and you will feel confident knowing you've torqued to spec and done the job right!