Note on installation of MOMO steering wheel
#1
Thread Starter
Rennlist Member
Joined: Jun 2001
Posts: 3,693
Likes: 100
From: California Boardwalk, Skanderborg Denmark
Note on installation of MOMO steering wheel
People have had difficulty finding the part number of the terminal to populate the female plug at the #71 position of the turn signal plug when the horn contact is installed for a MOMO steering wheel. I posted this elsewhere but people asked me to post as separate topic.
5 terminals are shown below, part number 999.652.639.22 shown on bag:
You need to make a pigtail using the orange horn plug harvested from the airbag connector harness on "clockspring" with the new terminal crimped onto the brown/white wire. I shrink wrapped some of the unused brown wire to the pigtail. Having the right crimper helps but not necessary:
The new wire goes here in the connector behind the turn signal assembly at position 71 to match the male pin from the horn ground you installed.
Brass horn ground contact part number 964.652.104.00 snaps into turn signal switch:
Wire in horn contact position #71
Finished ready to close the door on the connector
All done:
5 terminals are shown below, part number 999.652.639.22 shown on bag:
You need to make a pigtail using the orange horn plug harvested from the airbag connector harness on "clockspring" with the new terminal crimped onto the brown/white wire. I shrink wrapped some of the unused brown wire to the pigtail. Having the right crimper helps but not necessary:
The new wire goes here in the connector behind the turn signal assembly at position 71 to match the male pin from the horn ground you installed.
Brass horn ground contact part number 964.652.104.00 snaps into turn signal switch:
Wire in horn contact position #71
Finished ready to close the door on the connector
All done:
#4
Thread Starter
Rennlist Member
Joined: Jun 2001
Posts: 3,693
Likes: 100
From: California Boardwalk, Skanderborg Denmark
I would like to keep my stock of them. A Porsche dealer can order for you using that part number shown, they are around $1.00 each.
Trending Topics
#8
Thread Starter
Rennlist Member
Joined: Jun 2001
Posts: 3,693
Likes: 100
From: California Boardwalk, Skanderborg Denmark
#9
For 944 models that came with an airbag - This is the connector piece that is needed! - https://www.porscheatlantaperimeterp.../N0175994.html