When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That would be a great parts car for someone in the area. For $2000 you get almost $2000 worth of wheels if they are OEM Cup 2 on the car and even better if the spare set are hollow spoke Turbo wheels. Rear interior 1/4 panels actually look decent. Front spoiler appears to be intact. All lights present. Lots of parts that add up if someone is doing a partial resto.
Whoever did those lights seemed to have done a professional job.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
That pump looks exactly like the one I pulled off. It's a cheap Ebay pump.
Car isn't that bad but without being able to start or drive it has to be treated as a parts car. When my S4 had the engine fire the insurance valued it at $1100 CDN as a non running parts car.
That pump looks exactly like the one I pulled off. It's a cheap Ebay pump.
Car isn't that bad but without being able to start or drive it has to be treated as a parts car. When my S4 had the engine fire the insurance valued it at $1100 CDN as a non running parts car.
The Flachbau from the Sondewunschprogramm for the 930 Turbo fewer than 1,000 produced was a very expensive option and it was rumored that it was also done to a 928 or two.... Not everyone liked the frog eyes/flounder eyes and some people had way too much money. You could get the slant nose on the 911 in 1981.
Reminds me of Marcus Hutchinson's widebody, but the CL car is not a widebody. I dug up an old e-mail reply from Marcus (from 2001) where he said he used a Mazda RX7 headlight mechanism and it was not difficult as long as someone knows how to weld aluminum. This is the best picture I have of his car.
01-25-2016, 04:14 PM
George Layton March 2014
