6 speed conversion in progress
06-08-2019, 10:54 PM
#61
...
Last edited by Bigfoot928; 05-23-2020 at 02:53 PM.
07-11-2019, 05:25 PM
#62
...
Last edited by Bigfoot928; 05-23-2020 at 02:53 PM.
The following users liked this post:
booch (07-11-2019)
11-28-2019, 11:21 PM
#63
...
Last edited by Bigfoot928; 05-23-2020 at 02:53 PM.
12-01-2019, 01:35 PM
#64
Developer
finally got around to connecting the backup,lights and the speedometer connectors, and the reverse switch is too long to get even a shaved down connector on it. I could have just pushed the individual pins in but I didn't like that solution. I found a low profile reverse switch that should solve the problem.
12-01-2019, 01:37 PM
#65
...
Last edited by Bigfoot928; 05-23-2020 at 02:53 PM.
12-15-2019, 08:52 PM
#66
...
Last edited by Bigfoot928; 05-23-2020 at 02:53 PM.
12-21-2019, 10:07 PM
#68
...
Last edited by Bigfoot928; 05-23-2020 at 02:54 PM.
12-21-2019, 11:51 PM
#69
Rennlist Member
Great progress with your conversion......bit surprised with some of your fitment issues since you are using Carl's upgrade......his instructions indicated the necessary clearances...... regardless, you have made some nice upgrades.....well done.
12-22-2019, 10:07 AM
#71
...
Last edited by Bigfoot928; 05-23-2020 at 02:54 PM.
12-22-2019, 11:39 AM
#72
Drifting
What's another week at this point? 
12-22-2019, 11:54 AM
#73
...
Last edited by Bigfoot928; 05-23-2020 at 02:54 PM.
12-22-2019, 04:19 PM
#74
...
Last edited by Bigfoot928; 05-23-2020 at 02:54 PM.
12-25-2019, 11:56 PM
#75
...
Last edited by Bigfoot928; 05-23-2020 at 02:54 PM.