6 Speed Trans Swap/Pics
#34
Rennlist Member
Thread Starter
Stock gas tank fits, stock exhaust fits. Got some great wilwood adapters from XS Chop. 330's front, S4 rears. Check out the pics.
Thanks,
Dinsdale
Thanks,
Dinsdale
#35
Pro
If you can produce a kit, you'll have us 928ers beating a path to your door.
#38
Rennlist Member
Thread Starter
The engine clutch mount is commonly referred to as a bell housing. We constructed a custom bellhousing from a duct tape and JB weld composite. Dipped in tequila and baked at 325 for 3 hrs!!! Naaaaaa I'm lyin. We cut the stock bellhousing and welded on an adapter plate to fit the vette tube.
#40
Pro
Join Date: Aug 2010
Location: 3rd Rock From The Sun
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
#43
I kinda doubt that any of the GM autos will fit. But, generally you just need a transmission controller. Kinda like this;
http://www.americanhotrodsolutions.c...ller_4l60e.htm
I'd much rather have the manual like these guys have fitted though. But just the fact that we're discussing this is awesome. The options are HUGE!
http://www.americanhotrodsolutions.c...ller_4l60e.htm
I'd much rather have the manual like these guys have fitted though. But just the fact that we're discussing this is awesome. The options are HUGE!
#44
I could see the appeal of the 6 speed auto too. From the little bit I have read about the manual conversions the main chore is getting all the clutch and pedal stuff in the car.