When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I guess I need to search to see what else you offer. Do you have a website?
Hi James, I don't have a web site, but you can see a list of the kinds of things I pretty much offer, in my signature. Too, I think there are several threads on this august Forum about most or all of my offerings. If it comes down to particular questions, let me know either here, in one of the threads, or by PM, whichever you wish.
__________________
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
Hi Jerry, have you given any though to adding some sort of filter or screen to the vent hole on the cowl cover? I have your cover, but I notice I get quite a bit of pine needles, small leaves, and other outdoor debris under the cowl cover. I was thinking of glueing some fabric screen material around the edges on the underside. What are your thoughts on this?
That’s the fresh air hole right? I’d think it would be even better to offer a hole delete option, so much crap gets in there...and accumulates. I’d be totally into that! Store my original and use something like this.
Hi Jerry, have you given any though to adding some sort of filter or screen to the vent hole on the cowl cover? I have your cover, but I notice I get quite a bit of pine needles, small leaves, and other outdoor debris under the cowl cover. I was thinking of glueing some fabric screen material around the edges on the underside. What are your thoughts on this?
My thoughts are that there are actually 5 openings in and around the cowl cover, the intake hole you are referring to, the two drain holes at the front corners of the cover and then the open ends where the cover must clear the hood hinges and hood struts, I think. I think they would all need to be closed to solve your problem; and the two open ends cannot be closed with screen. Even then, I think you might need to remove the cover and the screens in order to properly clean the debri off of it.
Nevertheless, that is good creative thinking. Keep it up.
Last edited by Jerry Feather; 04-15-2018 at 11:03 AM.
When this thread gets bumped it seems to stimulate some interest in my Cowl Covers, Seal and Shell stickers. I mailed two sets yesterday; so I wonder if there is any more current interest?
When this thread gets bumped it seems to stimulate some interest in my Cowl Covers, Seal and Shell stickers. I mailed two sets yesterday; so I wonder if there is any more current interest?
Jerry, I will take a cowl cover with appropriate stickers for a 90 GT. Just PM me with payment instructions.
Jerry, I need the cover, seal, and (because why not?) the stickers for an '86.5. If you PM me with info about payment, I'm happy to complete the order.
Jerry, I need the cover, seal, and (because why not?) the stickers for an '86.5. If you PM me with info about payment, I'm happy to complete the order.
Thanks!
Hi McGin. Welcome to the Shark Tank. Tell us more about yourself and your 928. Pictures will be welcome also. Excellent first Post by the way.
Thanks for your interest in my product. PM is on the way.
Hello Jerry. From one of your old signatures you had listed the Flush Centre Console.
Did you ever sell the 'flush' insert or you did the conversion yourself?
I would be interested in the insert for a 5 speed as I would prefer to perform my own custom mod
(tablet instead of 2-din stereo) since I listen to a small portable Sat Radio
When this thread gets bumped it seems to stimulate some interest in my Cowl Covers, Seal and Shell stickers. I mailed two sets yesterday; so I wonder if there is any more current interest?
I would be in for one for my latest project early 1986
02-11-2018, 12:18 PM
