1989 928 S4 Cabriolet - On the Road and Getting Prettier - Work In Progress
#106
Burning Brakes
Thread Starter
Join Date: May 2011
Location: Tucson, AZ
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Day 12... Paint Prep
... prepping for paint today.... It heads to Phoenix next Friday for a fresh makeover and some cleanup... I have had terrible luck in Tucson for painting and always better luck in Phoenix... so away she goes next Friday after the Auto tranny fluid change and gasket changeout.
Rub strips and mirrors off for aeromirrors... break-light and antenna removed and window trim removed so far.
Rub strips and mirrors off for aeromirrors... break-light and antenna removed and window trim removed so far.
#107
Burning Brakes
Thread Starter
Join Date: May 2011
Location: Tucson, AZ
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Speaker work
Had some time and got the new shark speakers in, so here they are in the panel. The will look even better when the panels are back in the car
The old ones were toast ... now once I get a stereo in it will be nice
The old ones were toast ... now once I get a stereo in it will be nice
#108
Not the sharpest tool in the shed
Rennlist Member
Rennlist Member
Emerald, looks good! Are you painting the car the same color? Will you be putting the third light back on the trunk?
#109
Burning Brakes
Thread Starter
Join Date: May 2011
Location: Tucson, AZ
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
#110
Burning Brakes
Thread Starter
Join Date: May 2011
Location: Tucson, AZ
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Got my baby back from Radmacher Porsche Service here in Tucson after the tranny fluid change... Oh baby... only thing that slips now is the tires on the street giddy-up baby!!
Also finally wired in a quick stereo so I will have some tunes for the Gathering on the 7th.... I have the door panels out still... toying with putting them in temp just so I have have tunes on the way up Friday for the paint drop off in Phoenix... though the sound of the motor is a sound to fall in love with as well...
Also finally wired in a quick stereo so I will have some tunes for the Gathering on the 7th.... I have the door panels out still... toying with putting them in temp just so I have have tunes on the way up Friday for the paint drop off in Phoenix... though the sound of the motor is a sound to fall in love with as well...
#111
Burning Brakes
Thread Starter
Join Date: May 2011
Location: Tucson, AZ
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
The work continiues
since I lost my belts and wire harness, I decided it was time to do the top end as well... and as I started that project it was one buy after another... Just about everything is new... and the things that are now will be. I ended up with some vacuum leaks (flappy valve I think and I know where a couple others are).
Here are some shots for fun
1st shot is the end of the harness and the belts...
Here are some shots for fun
1st shot is the end of the harness and the belts...
#113
Burning Brakes
Thread Starter
Join Date: May 2011
Location: Tucson, AZ
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
I will get some more full shots once I have her up and running better. She runs wen I get he going, just a couple vacuum leaks and she will be back to perfect...
#115
Drifting
I think I pulled a muscle just looking at the photos! WELL DONE! And a true ONE OF a KIND car too. Looks fantastic. I hope to see it one day.
I don't know how I missed this thread until tonite. I am sorry I am late to the game but glad I caught up.
I don't know how I missed this thread until tonite. I am sorry I am late to the game but glad I caught up.
#119
Burning Brakes
Thread Starter
Join Date: May 2011
Location: Tucson, AZ
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Now if I can get the vacuum leaks taken care of, I will be golden.
I have more parts on order from roger right now, so a week or so and I should be back on the road
Last edited by Spun; 07-02-2012 at 04:59 PM.