928 engine in another car
#31
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Soupcan, good find on the GTS heads on the BBC. There was an article in last month's Hot Rod magazine about that Ardema guy in general with his overhead cam hybrids, and showed the same street rod with GTS heads. Said it was a 427 block with "Porsche 928 5.3 liter heads". LOL. Never heard of a 5.3 liter GTS, but what the hell. It was still nice to see some positive exposureon the 928. The editors letter up front spoke very highly about the 928, yet very poorly about the 924/944 series.
#33
Racer
Join Date: Jan 2009
Location: Adelaide South Australia'79 5spd twin turbo
Posts: 326
Likes: 0
Received 1 Like
on
1 Post
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes the factory built twin turbo marinised S4 engines for Jackie Ikxe to fit to a speed boat. there is one exhibited in the museum in stuttgart.
Tass is using a 16 valve engine for his boat project.
I have been contemplating putting my twin turbo 4.5 in something else, race car , boat, as now I am self employed I can not afford to lose my license which is what surely will happen when I get caught in my 928!
Cheers Roy
Tass is using a 16 valve engine for his boat project.
I have been contemplating putting my twin turbo 4.5 in something else, race car , boat, as now I am self employed I can not afford to lose my license which is what surely will happen when I get caught in my 928!
Cheers Roy
#34
Fleet of Foot
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Soupcan, good find on the GTS heads on the BBC. There was an article in last month's Hot Rod magazine about that Ardema guy in general with his overhead cam hybrids, and showed the same street rod with GTS heads. Said it was a 427 block with "Porsche 928 5.3 liter heads". LOL. Never heard of a 5.3 liter GTS, but what the hell. It was still nice to see some positive exposureon the 928. The editors letter up front spoke very highly about the 928, yet very poorly about the 924/944 series.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#35
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just stumbled onto this thread. I don't think the 928 engine is all about performance. I built mine into a 5.0 hybrid so I know it can be about performance. To me it's all about the cool factor. There are very few engines that look as elegent as they perform. I think the 928 should have had a see through hood. It's a shame to hide it under cover. I've driven my car all over the country many times. I drive it as hard as I dare. Great engine!
BTW: We call the second photo "The Money Shot" Check out the reflection in the rear lid.
BTW: We call the second photo "The Money Shot" Check out the reflection in the rear lid.
#36
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
^^^ Exposed cam gears, LOL at that.
I think the main reason people say "you never see a 928 engine going into anything else" is not because they're heavy, underpowered, or bulky, it's because they only made approx. 60-70 000 of them. Ford cranked out over 150 000 Mustangs in a single year, which would logically be 150 000 motors as well, but it's way over that because there are so many variants and rebadges that a Mustang motor is also in that Mercury over there, oh, and it's also in that Contour SVT over there. Same with Chev 350's, they've made over 1 million Chev 350's, simple economics. I can't find any exact numbers on how many Chev 350's have been made, but you know it's well over 1 million.
Another thing, why is it everyone doing Chev 350 swaps in 928's knocks the 928 motor so much?? They conveniently ignore the huge displacement advantage when comparing a stock 5.0 (303 CI) to a hopped up 5.7 (350 CI). How about you compare a 305 Chev to a 303 Porsche for once?
Rant over.
Sources:
http://www.yellowmustangregistry.com/Production06.html
I think the main reason people say "you never see a 928 engine going into anything else" is not because they're heavy, underpowered, or bulky, it's because they only made approx. 60-70 000 of them. Ford cranked out over 150 000 Mustangs in a single year, which would logically be 150 000 motors as well, but it's way over that because there are so many variants and rebadges that a Mustang motor is also in that Mercury over there, oh, and it's also in that Contour SVT over there. Same with Chev 350's, they've made over 1 million Chev 350's, simple economics. I can't find any exact numbers on how many Chev 350's have been made, but you know it's well over 1 million.
Another thing, why is it everyone doing Chev 350 swaps in 928's knocks the 928 motor so much?? They conveniently ignore the huge displacement advantage when comparing a stock 5.0 (303 CI) to a hopped up 5.7 (350 CI). How about you compare a 305 Chev to a 303 Porsche for once?
Rant over.
Sources:
http://www.yellowmustangregistry.com/Production06.html
#37
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just stumbled onto this thread. I don't think the 928 engine is all about performance. I built mine into a 5.0 hybrid so I know it can be about performance. To me it's all about the cool factor. There are very few engines that look as elegent as they perform. I think the 928 should have had a see through hood. It's a shame to hide it under cover. I've driven my car all over the country many times. I drive it as hard as I dare. Great engine!
BTW: We call the second photo "The Money Shot" Check out the reflection in the rear lid.
BTW: We call the second photo "The Money Shot" Check out the reflection in the rear lid.
I hope that access panel behind the seats is clear.
Love the reflection! $
#38
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
^^^ ........Same with Chev 350's, they've made over 1 million Chev 350's, simple economics. I can't find any exact numbers on how many Chev 350's have been made, but you know it's well over 1 million.
.....Rant over.
Sources:
http://www.yellowmustangregistry.com/Production06.html
.....Rant over.
Sources:
http://www.yellowmustangregistry.com/Production06.html
Porsche thought the GTS engine as a replacement was worth over $30,000 when available so a fair comparison is to a $30,000 chevy ! There is a cool factor to having something rare and different just saw a Passat wagon with the 4 liter W8 all wheel drive for sale 275 hp but sadly automatic
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#39
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
cool thread revival...love that 914/8!
#40
Addict extrordinare
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Another thing, why is it everyone doing Chev 350 swaps in 928's knocks the 928 motor so much?? They conveniently ignore the huge displacement advantage when comparing a stock 5.0 (303 CI) to a hopped up 5.7 (350 CI). How about you compare a 305 Chev to a 303 Porsche for once?
Rant over.
Sources:
http://www.yellowmustangregistry.com/Production06.html
Rant over.
Sources:
http://www.yellowmustangregistry.com/Production06.html
#41
Captain Obvious
Super User
Super User
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
^^^ Exposed cam gears, LOL at that.
I think the main reason people say "you never see a 928 engine going into anything else" is not because they're heavy, underpowered, or bulky, it's because they only made approx. 60-70 000 of them. Ford cranked out over 150 000 Mustangs in a single year, which would logically be 150 000 motors as well, but it's way over that because there are so many variants and rebadges that a Mustang motor is also in that Mercury over there, oh, and it's also in that Contour SVT over there. Same with Chev 350's, they've made over 1 million Chev 350's, simple economics. I can't find any exact numbers on how many Chev 350's have been made, but you know it's well over 1 million.
Another thing, why is it everyone doing Chev 350 swaps in 928's knocks the 928 motor so much?? They conveniently ignore the huge displacement advantage when comparing a stock 5.0 (303 CI) to a hopped up 5.7 (350 CI). How about you compare a 305 Chev to a 303 Porsche for once?
Rant over.
Sources:
http://www.yellowmustangregistry.com/Production06.html
I think the main reason people say "you never see a 928 engine going into anything else" is not because they're heavy, underpowered, or bulky, it's because they only made approx. 60-70 000 of them. Ford cranked out over 150 000 Mustangs in a single year, which would logically be 150 000 motors as well, but it's way over that because there are so many variants and rebadges that a Mustang motor is also in that Mercury over there, oh, and it's also in that Contour SVT over there. Same with Chev 350's, they've made over 1 million Chev 350's, simple economics. I can't find any exact numbers on how many Chev 350's have been made, but you know it's well over 1 million.
Another thing, why is it everyone doing Chev 350 swaps in 928's knocks the 928 motor so much?? They conveniently ignore the huge displacement advantage when comparing a stock 5.0 (303 CI) to a hopped up 5.7 (350 CI). How about you compare a 305 Chev to a 303 Porsche for once?
Rant over.
Sources:
http://www.yellowmustangregistry.com/Production06.html
#42
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I built my Alien because I wanted a car that I thought Porsche should have built. I wanted a V8 Porsche two seat pure sports car. It had to have a Porsche engine. A stripped down, light weight car in the spirit of the direction I think Porsche would have taken if they would have done this. Am I right? Hell, I don't know. But I like.
I rebuilt three 928 engines and never found them to be all that expensive to rebuild. If you have good core parts it's no more expensive than a chevy.
I even had a M28/11 block bored from 4.7 to 5.0 for $ 180.00 I never could understand why guys think it's cheaper to install a chevy. By the time you fit, convert and purchase all the adaptors, mounts, harnesses, hoses, and invest months of weekends in the garage you end up with a chevy you could just purchase. Like a Camero. I think it's far more of an issue of confidence and skill than money.
I rebuilt three 928 engines and never found them to be all that expensive to rebuild. If you have good core parts it's no more expensive than a chevy.
I even had a M28/11 block bored from 4.7 to 5.0 for $ 180.00 I never could understand why guys think it's cheaper to install a chevy. By the time you fit, convert and purchase all the adaptors, mounts, harnesses, hoses, and invest months of weekends in the garage you end up with a chevy you could just purchase. Like a Camero. I think it's far more of an issue of confidence and skill than money.
#43
Instructor
Join Date: Apr 2009
Location: London, U.K.
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
And sorry to pick up on a different part of a resurrected thread, but..
the interior shot of that ^^ Sbarro... Wow, just Wow!
"I understand that drinks at Club Tropicana are very reasonably priced..."
"I understand that drinks at Club Tropicana are very reasonably priced..."
![](http://sbarro.perso.neuf.fr/voitures/Golf300S/Sbarro_Golf_300S_interieur.jpg)
#44
Addict extrordinare
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I rebuilt three 928 engines and never found them to be all that expensive to rebuild. If you have good core parts it's no more expensive than a chevy.
I even had a M28/11 block bored from 4.7 to 5.0 for $ 180.00 I never could understand why guys think it's cheaper to install a chevy. By the time you fit, convert and purchase all the adaptors, mounts, harnesses, hoses, and invest months of weekends in the garage you end up with a chevy you could just purchase. Like a Camero. I think it's far more of an issue of confidence and skill than money.
I even had a M28/11 block bored from 4.7 to 5.0 for $ 180.00 I never could understand why guys think it's cheaper to install a chevy. By the time you fit, convert and purchase all the adaptors, mounts, harnesses, hoses, and invest months of weekends in the garage you end up with a chevy you could just purchase. Like a Camero. I think it's far more of an issue of confidence and skill than money.
Also, I believe you had to "fit, convert and purchase all the adaptors, mounts, harnesses, hoses, and invest months of weekends in the garage.." and you ended up with a 914. Albiet a completely awesome 914.
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#45
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So you had the block bored for less than $200. How much were the new pistons?
Also, I believe you had to "fit, convert and purchase all the adaptors, mounts, harnesses, hoses, and invest months of weekends in the garage.." and you ended up with a 914. Albiet a completely awesome 914.
That thing has "I'm really sorry officer" written all over it.
Also, I believe you had to "fit, convert and purchase all the adaptors, mounts, harnesses, hoses, and invest months of weekends in the garage.." and you ended up with a 914. Albiet a completely awesome 914.
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Oh, and yes, I do have a 914-8 but it's all Porsche all the time. I can't think of many engine swaps that actually add value to a car except this one. Most are cute but cut the value of the car in half. Like a chevy in a 928. Sure there are a few that have brought some real money but most are just a novelty. Never really driven or finished to a high level or sort out all the issues associated with such home engineering.
I have been stopped by John Law. No tickets yet. Once they look through the engine grill and get to chatting it's like a jedi mind trick or something...
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)