s4 repaint= ?
#16
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Its expensive because of many factors;
Original paint is very high quality, lesser quality is a bit obvious.
Porsche rubber parts need replacing at Porsche prices.
Lots of labor required for a good job, plus the car needs to sit for some time between stages and that takes up shop space.
Good paint isn't cheap.
Shop needs to know how to prep and paint polyurethane, aluminum, and steel.
At least on the East coast there are a few known good places.
Original paint is very high quality, lesser quality is a bit obvious.
Porsche rubber parts need replacing at Porsche prices.
Lots of labor required for a good job, plus the car needs to sit for some time between stages and that takes up shop space.
Good paint isn't cheap.
Shop needs to know how to prep and paint polyurethane, aluminum, and steel.
At least on the East coast there are a few known good places.
#17
Not the sharpest tool in the shed
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
http://www.autoteknika.com/paint-pro...-technologies/
#18
928 Collector
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Back when I had a 911 alongside the 928's I used to see very clearly how simple a 911 is to paint ... there is almost nothing to remove compared to the 928's incredibly complicated bazillion bits and pieces
#19
Man of many SIGs
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
#20
Banned
Thread Starter
Join Date: Oct 2003
Location: on a huge ball
Posts: 7,849
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The vehicle, if not for the decision of the flat black, will be painted the same color. What if an isolating coat is put on, then am I wrong to say the or all the paint is to be stripped?
-btw, Hello Fabio. Man it's been awhile . I hope everythings pretty good.
mike
-btw, Hello Fabio. Man it's been awhile . I hope everythings pretty good.
mike
#21
Banned
Thread Starter
Join Date: Oct 2003
Location: on a huge ball
Posts: 7,849
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Xpel Technologies, a Rennlist sponsor, sells matte finish wraps for cars. Not positive on the price but I would think less than a repaint for sure.
http://www.autoteknika.com/paint-pro...-technologies/
http://www.autoteknika.com/paint-pro...-technologies/
In my opinion anyways, I think the S4 with the cup 2 mags would look quite interesting in Matte.
My opinion.
#22
Rennlist Member
Join Date: Sep 2010
Location: Fresno, CA (summer in Calgary)
Posts: 1,376
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I had a shop in Chicago repaint my 944 for $1700 back in 2003 and it was actually a quite decent job.
There were some edge-peeling issues because of poor prep, and no trim was removed (only masked), but it turned out extremely well. I still have the car, which was covered in hail damage this summer, but aside from that tragedy the paint is still holding up really well, it is not dull or faded anywhere, and it sits in the Fresno sun quite a lot. I got a lot of complements on that car, it was absolutely worth the money I paid.
I think that there are many shops willing to cut a few corners and if you don't mind cheaper paint, it works out fine. I mean, in relation to a crummy dead old paint job. If you are trying to bring the car back to the condition of brand new, then, no, you cannot go this route, you have to pay the big bucks.
-Sean
There were some edge-peeling issues because of poor prep, and no trim was removed (only masked), but it turned out extremely well. I still have the car, which was covered in hail damage this summer, but aside from that tragedy the paint is still holding up really well, it is not dull or faded anywhere, and it sits in the Fresno sun quite a lot. I got a lot of complements on that car, it was absolutely worth the money I paid.
I think that there are many shops willing to cut a few corners and if you don't mind cheaper paint, it works out fine. I mean, in relation to a crummy dead old paint job. If you are trying to bring the car back to the condition of brand new, then, no, you cannot go this route, you have to pay the big bucks.
-Sean
#23
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I keep thinking about:
1) pulling bumpers, mirrors, front fenders, rub strips, rain gutter, front cowl,hood, rear quarter glasses, locks, bumperettes, wipers etc.
2) Wet sanding and filling all of the painted parts to my satisfaction.
3) Putting all the parts in a rented U haul.
4) Delivering all the parts to MAACO or 1 day paint.
5) Having them put their best single stage paint job on the parts ($1000?)
6) Carting it home and reassembling with new bumper beads and mirror gaskets.
Left on might be: windshield trim, door window trim, hatch window trim. Just because I don't think I can get it off without damaging it. Or perhaps if I search I can find a turtorial on getting that stuff off such that it will go back on. Actually probalby just door trim as I think I probalby can get the other stuff off intact.
Perhaps I can find a better shop that will do the same thing, but with better paint (Imaron, or Deltron or something), although I think if you buy their better paint jobs the Maaco paint is probably OK.
Seems to me like 3 weekends of work and $1000 will do it. Keep in mind my cars are drivers so the paint job only has to be good enough that the flaws don't look as bad as the parking lot rash it will start to pick up within a few months. And the car has to be at least $1000 and 3 weekends better when I am done that when I started, but not look like it is factory new.
So, why won't this work?
1) pulling bumpers, mirrors, front fenders, rub strips, rain gutter, front cowl,hood, rear quarter glasses, locks, bumperettes, wipers etc.
2) Wet sanding and filling all of the painted parts to my satisfaction.
3) Putting all the parts in a rented U haul.
4) Delivering all the parts to MAACO or 1 day paint.
5) Having them put their best single stage paint job on the parts ($1000?)
6) Carting it home and reassembling with new bumper beads and mirror gaskets.
Left on might be: windshield trim, door window trim, hatch window trim. Just because I don't think I can get it off without damaging it. Or perhaps if I search I can find a turtorial on getting that stuff off such that it will go back on. Actually probalby just door trim as I think I probalby can get the other stuff off intact.
Perhaps I can find a better shop that will do the same thing, but with better paint (Imaron, or Deltron or something), although I think if you buy their better paint jobs the Maaco paint is probably OK.
Seems to me like 3 weekends of work and $1000 will do it. Keep in mind my cars are drivers so the paint job only has to be good enough that the flaws don't look as bad as the parking lot rash it will start to pick up within a few months. And the car has to be at least $1000 and 3 weekends better when I am done that when I started, but not look like it is factory new.
So, why won't this work?
#24
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
There's a Swedish guy on the list who has a matte-black S4.. might find a pic in the random pic thread - pretty sure its been posted in the last 3 months.
#25
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Porsche's are beautiful cars, so even a cheap paint job can look stunning at say twenty feet when its new. What costs the bucks is for that stunning look to continue as you walk toward the car.
#26
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
These posts here have pics of the matte-black car:
https://rennlist.com/forums/7781806-post4475.html
https://rennlist.com/forums/7781832-post4477.html
https://rennlist.com/forums/7781806-post4475.html
https://rennlist.com/forums/7781832-post4477.html
#28
Rennlist Member
Join Date: Sep 2010
Location: Fresno, CA (summer in Calgary)
Posts: 1,376
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm not sure what is meant by "looks good at twenty feet," are you talking about the quality of the paint itself, like blemishes or poor layout and uneven sheen? My 944 had no issues of that kind. My hood, for instance, looked exactly like a brand new Porsche hood, up close. It was like a mirror.
#29
Rocket Pilot
Rennlist Member
Rennlist Member
Join Date: Apr 2004
Location: gettysburg pa.
Posts: 3,298
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Man H , I have to disagree there. I would much rather disassemble any year 928 than any of the same year 911. I have painted many of both and the 911 is a bitch. Most of the fasteners break when you take them off-no matter how much you spray them and the window frames are time consuming as all hell, as well as there will always be some kind of rust on someones"rust free car" especially under the windshield. I love doing 911's because I love 911's, but 928 jobs go so much faster.
#30
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I keep thinking about:
1) pulling bumpers, mirrors, front fenders, rub strips, rain gutter, front cowl,hood, rear quarter glasses, locks, bumperettes, wipers etc.
2) Wet sanding and filling all of the painted parts to my satisfaction.
3) Putting all the parts in a rented U haul.
4) Delivering all the parts to MAACO or 1 day paint.
5) Having them put their best single stage paint job on the parts ($1000?)
6) Carting it home and reassembling with new bumper beads and mirror gaskets.
Left on might be: windshield trim, door window trim, hatch window trim. Just because I don't think I can get it off without damaging it. Or perhaps if I search I can find a turtorial on getting that stuff off such that it will go back on. Actually probalby just door trim as I think I probalby can get the other stuff off intact.
Perhaps I can find a better shop that will do the same thing, but with better paint (Imaron, or Deltron or something), although I think if you buy their better paint jobs the Maaco paint is probably OK.
Seems to me like 3 weekends of work and $1000 will do it. Keep in mind my cars are drivers so the paint job only has to be good enough that the flaws don't look as bad as the parking lot rash it will start to pick up within a few months. And the car has to be at least $1000 and 3 weekends better when I am done that when I started, but not look like it is factory new.
So, why won't this work?
1) pulling bumpers, mirrors, front fenders, rub strips, rain gutter, front cowl,hood, rear quarter glasses, locks, bumperettes, wipers etc.
2) Wet sanding and filling all of the painted parts to my satisfaction.
3) Putting all the parts in a rented U haul.
4) Delivering all the parts to MAACO or 1 day paint.
5) Having them put their best single stage paint job on the parts ($1000?)
6) Carting it home and reassembling with new bumper beads and mirror gaskets.
Left on might be: windshield trim, door window trim, hatch window trim. Just because I don't think I can get it off without damaging it. Or perhaps if I search I can find a turtorial on getting that stuff off such that it will go back on. Actually probalby just door trim as I think I probalby can get the other stuff off intact.
Perhaps I can find a better shop that will do the same thing, but with better paint (Imaron, or Deltron or something), although I think if you buy their better paint jobs the Maaco paint is probably OK.
Seems to me like 3 weekends of work and $1000 will do it. Keep in mind my cars are drivers so the paint job only has to be good enough that the flaws don't look as bad as the parking lot rash it will start to pick up within a few months. And the car has to be at least $1000 and 3 weekends better when I am done that when I started, but not look like it is factory new.
So, why won't this work?