SF Bay Area Wrenchfest -OR- BBQ & BS..
#17
Addict
Rennlist Member
Rennlist Member
I haven't chimed in yet, welcome to the NorCal928 area. Lots of nice people
here, and a great deal of 928 knowledge also. Bill B, Jim M, Dennis K, Dave A,
Tom C, and Marc T have all helped me keep my car going. They're a great
support group and I'm very thankful for all their help. To bad I don't have a
place to BBQ, or I'd offer a location. Now that racing season is over, I'll have
more time to socialize...
#19
Burning Brakes
Welcome to Rennlist/ Norcal928.
I would enjoy helping with MM/ oil pan but I am doing a auto-x on Saturday and busy with PCA corral at the Vintage races at Sears Point on Sunday.
Next weekend doing a DE at Sears and the rest of the month filled with PCA events.
I would enjoy helping with MM/ oil pan but I am doing a auto-x on Saturday and busy with PCA corral at the Vintage races at Sears Point on Sunday.
Next weekend doing a DE at Sears and the rest of the month filled with PCA events.
#22
Race Director
#23
Rennlist Member
Thread Starter
How long you be up there...why drive when you can fly?
BUT...I think Id rather work on my ignition miss instead.
A little more heads up...sure, id fly up there anytime to "do ****"..
#27
Race Director
#28
Rennlist Member
Thread Starter
Yup, cant wait for some limited fun next spring...
I just went out and did a cursory inspection of my coils..
I have new Beru wires, new Bosch copper plugs here tomorrow, and new Bosch caps and rotors on hand for the work.
I can only see up inside the drivers side coil plug, and there -is- some corrosion up in there..im reading that this is an 'issue'...
HOW much is 'bad'...is this a sign of lost oil in the coil?
I have a spark miss..always there, all RPMs.
#29
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
If you are interested in doing the timing belt or motor mounts/pan gasket, it would be best to do these at your place. These are big jobs that take all day and if something goes wrong, we need a part, etc., it would be best if you and the car didn't get stranded for a day or two somewhere else. Anyway, we should plan this for sometime in November. If you really need to jump in on these jobs now, I can at least provide "phone support".
#30
Rennlist Member
Thread Starter
If you are interested in doing the timing belt or motor mounts/pan gasket, it would be best to do these at your place. These are big jobs that take all day and if something goes wrong, we need a part, etc., it would be best if you and the car didn't get stranded for a day or two somehere else. Anyway, we should plan this for sometime in November. If you really need to jump in on these jobs now, I can at least provide "phone support".
No...just..some once over'ing by an experienced eye with perhaps some scan tools.