Updated: For Sale S4 5.0L Engine $475
1 Attachment(s)
I've got a 5.0L short block that I pulled out of my running MY87 S4. Car ran fine but had high miles (200k). Compression numbers as follows (1-8): 220, 215, 170, 190, 170, 185, 172, 190. Cylinder walls look good. Surely someone can use this motor, great starting point for a project or run it as-is. Local pick-up only (for now...). PM if interested.
Block numbers: M28/42 81H 07399 High production number, sorry guys - no squirter here. |
Hey there -
People will ask you what year S4 its from. |
Updated accordingly.
|
15 seconds with Brake cleaner and a paper towel will reveal an engine serial number that might ignite lots of speculation about whether it's a squirter block and then some hot 'n heavy PM'ing with offers, if it is.
No such thing as TMI when yer sellin' something.... |
Originally Posted by kccampro
(Post 7714564)
Updated accordingly.
And now that you have said its an 87, people will want to know what number. All 87s have the better rods and the thicker pistons. |
come out of an automatic or manual?
|
Originally Posted by Rob Edwards
(Post 7714587)
15 seconds with Brake cleaner and a paper towel will reveal an engine serial number that might ignite lots of speculation about whether it's a squirter block and then some hot 'n heavy PM'ing with offers, if it is.
Originally Posted by Franks928s
(Post 7715106)
come out of an automatic or manual?
|
So shipping is not possible? I am talking within the US.
Greg |
bump - additional detail added.
|
Why was the engine pulled?
|
Even without the squirters, you probably still have the big-dish thick-top pistons and the PPF rods. You might get a couple of hundred bucks for it. (I am not a pricing expert, so caveat venditor... )
Oh by the way, if you can give the minimum cylinder tower outside diameter for each of the cylinder towers, there's a small chance that those measurements might generate some interest.... |
Originally Posted by Greg Gray
(Post 7715233)
So shipping is not possible? I am talking within the US.
Originally Posted by Imo000
(Post 7716799)
Why was the engine pulled?
|
All times are GMT -3. The time now is 11:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands