Kickdown switch adjustment?
#1
Racer
Thread Starter
Kickdown switch adjustment?
Today while I was taking out the cruise control brain to try to restore it to life, I looked at the kickdown switch under the accelerator pedal. I have never felt that it was really kicking in like others on here describe their cars responding. I found that the "arm" attached to the accelerator pedal is still just barely not touching the kickdown switch when the pedal hits the floor. Is there a way to adjust the switch height so that the arm can depress and activate the switch? I did not see any way to adjust the arm itself, so I guess that there must be a way to adjust the switch.
Also, since I was in there repeatedly flooring the accelerator pedal with the engine off, will it cause any problems when I go to start the car the next time?? I don't think it will, but I wanted to make sure so that I don't damage anything.
Also, since I was in there repeatedly flooring the accelerator pedal with the engine off, will it cause any problems when I go to start the car the next time?? I don't think it will, but I wanted to make sure so that I don't damage anything.
#2
Rennlist Member
It turns and lengthens like the throttle ball connections. Take the gas pedal loose, two 10mm bolts at the floor, then turn the assembly a bit so you can see.
Should be one of those funky spring clips that passes through the socket body and keeps it from popping off the ball.
Should be one of those funky spring clips that passes through the socket body and keeps it from popping off the ball.