FS 2 small Setrab finned coolers
#1
Rainman
Rennlist Member
Rennlist Member
Thread Starter
FS 2 small Setrab finned coolers
As title states, 2 small Setrab finned coolers for sale. These have approx. 6mm ID flare fittings which flow water very well. This cooler has 12 rows. Dimensions of the unit itself are approximately 8.5L x 6T x 1.5W", and the mounting brackets extend out another few inches.
These units would work wonderfully as a heat exchanger for an AWIC. These would be good to run in parallel as they don't take up much space. These would fit well by themselves in front of the radiator/condensor.
Looking for $45 shipped for each of them, or buy both for $80 shipped.
These units would work wonderfully as a heat exchanger for an AWIC. These would be good to run in parallel as they don't take up much space. These would fit well by themselves in front of the radiator/condensor.
Looking for $45 shipped for each of them, or buy both for $80 shipped.
Last edited by V2Rocket; 09-04-2009 at 11:22 AM.
#3
Rainman
Rennlist Member
Rennlist Member
Thread Starter
the smaller thinner unit is originally an oil cooler which i picked up for use as a heat exchanger for an AWIC.
the large fat one is the stock oil cooler off a 944 turbo (i have these listed over there too), those are comparison pictures.