1000 HP FITTING PICTURES !!!!!
#47
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'd be afraid of over-reving the engine since the RPM cutoff is gone....throwing a valve or something.....
#48
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The plan is a run on an airfield to exceed 210 mph any dyno runs are for testing. Little point on guessing about what might fail since IF it lets go the evidence will probably be destroyed. Things tend to get pretty messed up all at once
#49
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
True on the post-mortem problems: Did the piston collapse and seize which caused the rods to fly through the block, or did the rods get noodled causing the piston to run amok? Either way you end up with a similar-looking collection of bent, broken, oily pieces...
#50
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It started here with this worn distributor gear...
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#51
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes when pieces of the piston come out the hole where the valve used to be that is when you know it was too much RPM .... 911 but I remember it well
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#53
Three Wheelin'
Thread Starter
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like
on
1 Post
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
To be honest ,I hardly drink, so I would prefer...hmmm...ah I know...I love American car T`shirts, preferably the ones with pictures on both sides, they are so much better than UK ones...
And if they have a 928 on even better
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
42 chest lol...
All the best Brett
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#54
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ya know, I don't recall Brett saying that he was going to set the new record with the car intact. ![ducking](https://rennlist.com/forums/graemlins/icon107.gif)
I mean, imagine being at the helm, you've just triggered to final nitrous stage and the car is hurtling down the runway at 215mph. You think you hear a slight engine noise, or your gauges tell you your going a little lean, but the GPS keeps climbing toward 220 and beyond and you've got nothing but open runway ahead of you. Do you lift? or are you committed at that point and keep it to the floor?
![ducking](https://rennlist.com/forums/graemlins/icon107.gif)
I mean, imagine being at the helm, you've just triggered to final nitrous stage and the car is hurtling down the runway at 215mph. You think you hear a slight engine noise, or your gauges tell you your going a little lean, but the GPS keeps climbing toward 220 and beyond and you've got nothing but open runway ahead of you. Do you lift? or are you committed at that point and keep it to the floor?
#56
Drifting
Join Date: Mar 2007
Location: royal oak, mi
Posts: 2,131
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Done Deal.
I was showing your pictures to some friends at work today. They think you are nuts but they will be cheering for you. They told me I should run the same "Wizards of Nos" set up on my car.
Good Luck
I was showing your pictures to some friends at work today. They think you are nuts but they will be cheering for you. They told me I should run the same "Wizards of Nos" set up on my car.
Good Luck
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#57
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#59
Three Wheelin'
Thread Starter
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like
on
1 Post
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi ![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
While on the subject of American clothing,as I have bought parts from most of the BIG 4...and received a lot of free advice from here so if any of the big four would like to send me any patches for my race suit with their company logos on ,I will be happy to have them sewn on![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
I will obviously post some pictures of me wearing suit lol....if its any help to them![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Postal address is...
BRETT AINLEY
MANAGING DIRECTOR
PCHEALTHCARE COMPUTERS LTD
767 WIMBORNE ROAD
MOORDOWN
BOURNEMOUTH
DORSET
BH9 2BA
ENGLAND
All the best Brett
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
While on the subject of American clothing,as I have bought parts from most of the BIG 4...and received a lot of free advice from here so if any of the big four would like to send me any patches for my race suit with their company logos on ,I will be happy to have them sewn on
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
I will obviously post some pictures of me wearing suit lol....if its any help to them
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Postal address is...
BRETT AINLEY
MANAGING DIRECTOR
PCHEALTHCARE COMPUTERS LTD
767 WIMBORNE ROAD
MOORDOWN
BOURNEMOUTH
DORSET
BH9 2BA
ENGLAND
All the best Brett
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#60
Three Wheelin'
Thread Starter
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like
on
1 Post
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
You should lol, Wizards of Nos stuff is years ahead of most American systems, Trev Langfield (owner of Wizards) has done consultancy work for both Holley/Nos and NX and both have sold his products in the past...
All the best Brett
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)