MityMse

I have the opportunity to purchase some nice Porsche wheels from a 968. The offsets on the fronts are 55 and the rears are 45. Will these fit the 928?

Thanks in advance,
ZC Wilson

MityMse

I forgot some important information. The fronts are 16x7 and the rears are 16x8. All tires are 225/50/16.

ZC Wilson

Ed Ruiz

I very seriously doubt those wheels will fit within the fender wells. The offset for the OEM flat-dish wheels is about 65mm. Why don't you get an aftermarket set from one of the big three? They sell wheels that they know will fit 928s. YMMV.

MityMse

Thanks, Ed. I took your advice and know I will get the correct offset.

ZC

Quaz

I ran 16" 968 wheels for 2 years without a problem. They look very nice and fit perfect. I have pictures if you would like them. They are not even close to being out of the fenders in the front and give a much more aggressive look in the rear once you remove the spacers.
<img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />

MityMse

Thanks for the info, Kevin. But I already purchased a set of Design 90 wheels that I know will fit my shark.

ZC