Climate Control Sliders
#1
Three Wheelin'
Thread Starter
Join Date: Nov 2004
Location: Evanston, IL, USA
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Climate Control Sliders
The sliders on my climate control are all wobbly. Can these be easily replaced, or are they simply not seated right? Don't want to just try pushing them in and have them break.
#2
Rennlist Member
The control sliders have two plastic support prongs on either side. They often break.
They also fit into metal brakets for support witch also fall off when the plastic prongs break. Hence the wobbly sliders.
The metal brackets and plastic contol sliders are available at 928 Specialist.
Good Luck
They also fit into metal brakets for support witch also fall off when the plastic prongs break. Hence the wobbly sliders.
The metal brackets and plastic contol sliders are available at 928 Specialist.
Good Luck
#3
Three Wheelin'
Thread Starter
Join Date: Nov 2004
Location: Evanston, IL, USA
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RDS928S
The control sliders have two plastic support prongs on either side. They often break.
They also fit into metal brakets for support witch also fall off when the plastic prongs break. Hence the wobbly sliders.
The metal brackets and plastic contol sliders are available at 928 Specialist.
Good Luck
They also fit into metal brakets for support witch also fall off when the plastic prongs break. Hence the wobbly sliders.
The metal brackets and plastic contol sliders are available at 928 Specialist.
Good Luck
edit - is this the whole thing?
http://www.mailordercentral.com/928i...574%20498%20KT
#4
Rennlist Member
Chris,
unfortunetly the unit does have to come out and be split apart to do it right. The fiber optics need to be inserted into the back of the new sliders.
Now would be a good time to order the Jaeger led light for the climate control system.
Good Luck Rich
unfortunetly the unit does have to come out and be split apart to do it right. The fiber optics need to be inserted into the back of the new sliders.
Now would be a good time to order the Jaeger led light for the climate control system.
Good Luck Rich
#5
Three Wheelin'
Thread Starter
Join Date: Nov 2004
Location: Evanston, IL, USA
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RDS928S
Chris,
unfortunetly the unit does have to come out and be split apart to do it right. The fiber optics need to be inserted into the back of the new sliders.
Now would be a good time to order the Jaeger led light for the climate control system.
Good Luck Rich
unfortunetly the unit does have to come out and be split apart to do it right. The fiber optics need to be inserted into the back of the new sliders.
Now would be a good time to order the Jaeger led light for the climate control system.
Good Luck Rich
Got it, I've seen the instructions, don't think it's too hard. It's going on the to-do list. Thanks!
#7
Three Wheelin'
Thread Starter
Join Date: Nov 2004
Location: Evanston, IL, USA
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MGW-Fla
Please share??
https://rennlist.com/forums/showpost...86&postcount=6
I've seen it elsewhere I'm sure on Nichol's page.
Trending Topics
#8
Rennlist Member
Originally Posted by RDS928S
The control sliders have two plastic support prongs on either side. They often break.
They also fit into metal brakets for support witch also fall off when the plastic prongs break. Hence the wobbly sliders.
The metal brackets and plastic contol sliders are available at 928 Specialist.
Good Luck
They also fit into metal brakets for support witch also fall off when the plastic prongs break. Hence the wobbly sliders.
The metal brackets and plastic contol sliders are available at 928 Specialist.
Good Luck