oil line adapters (nevermind, found some)
06-30-2006, 06:19 PM
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
oil line adapters (nevermind, found some)
Can anyone suggest a source for some connectors that are 22mm on one end and AN -12 on the other. I was just told Aeroquip doesn't even list them in their catalog. 
These are the fittings that come out of the block for oil cooler lines. So, they need to be 22mm to screw into the block and AN -12 to connect to the new oil lines.
Anyone??? Bueller??
Thanks in advance
Found some.... never mind.
These are the fittings that come out of the block for oil cooler lines. So, they need to be 22mm to screw into the block and AN -12 to connect to the new oil lines.
Anyone??? Bueller??
Thanks in advance
Found some.... never mind.
Last edited by Joe F; 06-30-2006 at 08:00 PM. Reason: Problem solved.
06-30-2006, 11:47 PM
#3
Addict
Rennlist Member
Rennlist Member
Thread Starter
Originally Posted by Tom. M
OK..so elaborate to the rest of us where you got them...I need to plumb in an external cooler too....
Later,
Tom
89 GT
Back from Adak..but on the way to Attu shortly..
Later,
Tom
89 GT
Back from Adak..but on the way to Attu shortly..
Keeping in mind the caveat that I was told by another supplier "sure we have those" but when I got there they didn't have them.
A place called Fluid Connector in NW Portland told me they have several in stock. http://www.fcpi.com/index.html
Steel instead of Aluminium but what ever. I will know Monday morning if they are in fact what we need.
Happy Independence Day
Cheers,
