Need Starter Wiring Advice
#1
Three Wheelin'
Thread Starter
Join Date: Feb 2004
Location: Jacksonville and sometimes St. Aug Beach, FL
Posts: 1,727
Received 341 Likes
on
171 Posts
Need Starter Wiring Advice
Installing a used FOE harness, which is in excellent shape, from 928 International.
Which terminal on the starter does the SMALL wire go to? I have two terminals which look the same and don' know which to use.
Pictures are a big help and NO, I didn't find anything else via search here
Secondly, anyone running the Precision Motorwerks supplimentary cable from starter to alternator. Any pictures? Any feedback?
Which terminal on the starter does the SMALL wire go to? I have two terminals which look the same and don' know which to use.
Pictures are a big help and NO, I didn't find anything else via search here
Secondly, anyone running the Precision Motorwerks supplimentary cable from starter to alternator. Any pictures? Any feedback?
#2
Team Owner
Trey please post a picture of your FOE harness and the connector choices you have
#3
Three Wheelin'
Thread Starter
Join Date: Feb 2004
Location: Jacksonville and sometimes St. Aug Beach, FL
Posts: 1,727
Received 341 Likes
on
171 Posts
Ha! Thanks, Stan. I went looking for pictures and found a slightly blurred one which tells me where to hook up the smaller ring terminal on the starter. DUh!
Really curious about the implementation of an auxiliary or secondary positive wire from starter to alternator. Seems @GregBBRD has an offering through Precision Motorwerks but I haven't seen any pictures in existing vehicles or heard anyone extolling the benefits.
Would love to hear opinions and here's the picture I found....
Look how bad that old harness was!!!! That is BARE green copper wire.
Really curious about the implementation of an auxiliary or secondary positive wire from starter to alternator. Seems @GregBBRD has an offering through Precision Motorwerks but I haven't seen any pictures in existing vehicles or heard anyone extolling the benefits.
Would love to hear opinions and here's the picture I found....
Look how bad that old harness was!!!! That is BARE green copper wire.
#4
Yellow wire goes to the lowest point, black with yellow stripe goes to the middle and of course the big red one goes on the large post.