928 S4 transmission cable clip at throttle quadrant loose
Plastic clip backing at throttle quadrant broken off - cable to throttle body loose - very late shifting up due to effect on Bowden cable (trans) - can the TB cable component be replaced or is it the entire cable assembly-using zip tie to hold clip (TB cable) to quadrant - apparently very miss adjusted. |
Replace entire cable. Amazingly cheap!
|
Billy, is this the cable that goes all the way back to the trans your'e talking about?
Greg, does the TT need to be removed to get to the cable? I replaced 3 of the 4 cables, leaving the long one alone and now think I should've... now thats it back together it would seem like a pain to install new one having to travel through those foam style inserts along the top of the torque tube correct..? |
I have verified the cable as the one to the TB from the T quadrant which again effects the cable adjustment to the trans (shifting) Bowden cable. |
Gotcha! Thank you for clarification..
|
Thanks for the reply will replace the cable -$30.
|
All times are GMT -3. The time now is 06:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands