Antilock failure
#2
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,322
Received 1,542 Likes
on
1,006 Posts
The second thing would be to borrow a Bosch Hammer or Theo Tool and see if an error code has been stored.
Whereabouts are you located? Someone not too far away might be able to help.
#3
Team Owner
when does the light come on?
when you start the engine?
or after you have started moving?
when you start the engine?
or after you have started moving?
#6
Nordschleife Master
A bunch of them are going to caravan down to Virginia in May for the Sharks in the Mountains event.
https://rennlist.com/forums/928-foru...-2018-brp.html
They have get-togethers and fun runs every so often in the summer.
Trending Topics
#8
Team Owner
If you cant get a tester,
^^^^ what he said Or, test the ABS relay
^^^^ what he said Or, test the ABS relay
Last edited by Mrmerlin; 02-11-2018 at 10:20 PM.
#9
I've been finding more and more of the relays in the control unit (drivers fender) failing. Get with Roger as he's found a not so astronomically priced alternative than the one from Porsche.
#10
Rennlist Member
relay diagram
I assume your fuse/relay diagram that comes with car in sleeve under wooden foot panel in passenger footwell is gone. You can find M/Y specific for your car at 928gt.com. seek drop down menu at right column of home page.
#11
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,322
Received 1,542 Likes
on
1,006 Posts
The two on-ABS-pump relays are not on the fuse panel chart.
#12
Mrmerlin, thanks will test.
SeanR & SteveG, thanks but I do have the original charts from the fuse box. When I get back home from FL I will have a number of tests to make from relay tests to wheel sensors and wiring connections.
Ive gained a ton of ideas from all the suggestions and comments.
SeanR & SteveG, thanks but I do have the original charts from the fuse box. When I get back home from FL I will have a number of tests to make from relay tests to wheel sensors and wiring connections.
Ive gained a ton of ideas from all the suggestions and comments.
#14
Parts heaven has relays made by a German company for really good price. They are in Hayward ca but can ship it to you too. eBay is a good source too.
i have had two failed relays (abs and dme). I think 28 year old electronics fail more often than mechanical parts!
i have had two failed relays (abs and dme). I think 28 year old electronics fail more often than mechanical parts!
#15
Rennlist Member
Relays are mechanical