Christmas Sale at Precision Motorwerks
#1
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Christmas Sale at Precision Motorwerks
It's true. A very special Christmas sale, for a very limited time.
From December 15th to December 31st (good luck getting in touch with us after Friday the 22nd) everything we make is on sale.
You can take a full 10% right off the top of everything.....and as much as 20% on some items.
High output alternators, torque tube shafts, clutch shafts, fuel hoses, breather systems, injector adapters, crankshaft dampers, pan spacers, windage trays, oil filler neck baffles, 14 pin harnesses (the absolute best ones made), crankshafts, rods, pistons, oil cooler hose sets, late model undertray/oil cooler protection plates (the best ones made)....the list goes on and on.
If you've been waiting to pick-up something for your car, now is the time!
From December 15th to December 31st (good luck getting in touch with us after Friday the 22nd) everything we make is on sale.
You can take a full 10% right off the top of everything.....and as much as 20% on some items.
High output alternators, torque tube shafts, clutch shafts, fuel hoses, breather systems, injector adapters, crankshaft dampers, pan spacers, windage trays, oil filler neck baffles, 14 pin harnesses (the absolute best ones made), crankshafts, rods, pistons, oil cooler hose sets, late model undertray/oil cooler protection plates (the best ones made)....the list goes on and on.
If you've been waiting to pick-up something for your car, now is the time!
__________________
greg brown
714 879 9072
GregBBRD@aol.com
Semi-retired, as of Feb 1, 2023.
The days of free technical advice are over.
Free consultations will no longer be available.
Will still be in the shop, isolated and exclusively working on project cars, developmental work and products, engines and transmissions.
Have fun with your 928's people!
greg brown
714 879 9072
GregBBRD@aol.com
Semi-retired, as of Feb 1, 2023.
The days of free technical advice are over.
Free consultations will no longer be available.
Will still be in the shop, isolated and exclusively working on project cars, developmental work and products, engines and transmissions.
Have fun with your 928's people!
#4
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
These two Email addresses will get you right to the boss:
MaryBBRD@att.net
GregBBRD@aol.com
Last edited by GregBBRD; 12-15-2017 at 04:52 PM.
#5
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Starting over with a clean sheet of paper, I made up pieces designed to protect all that valuable stuff on '87 and later cars, with special attention to protecting the oil cooler and oil cooler protection piece on the 1990 and later cars.
After a few test pieces....and a few changes in design, I took the perfected design and gave a dozen sets away for long term testing....for a year....on cars that were very low. The results were fantastic. No more damaged oil coolers. No more damaged undertrays. No destroyed spoilers.
Great for owners....bad for the spoiler, oil cooler, oil cooler protection piece, and undertray business.
These "tuck" under the stock front spoiler, protecting it...and are just low enough to protect the oil cooler, oil cooler support, and the undertray from any driveway or any other angled piece of asphalt one might run across. While the spoiler ends up "sandwiched" between the aluminim protection pieces and the ground (if you have a very low car and hit a very steep driveway), no one has "worn through" a spoiler to expose raw metal, to date.
Like everything I make, a lot of thought and engineering went into these pieces. They fit and work...which, as we know, can be rather unique in the "aftermarket" 928 world.!
#7
Rennlist Member
You're definitely getting my money this season with what I'm putting into my 81. Any chance you would sell a part of your breather system (the modified dip stick and check valve with tubing for the provent oil return) separately?
Trending Topics
#8
Rennlist Member
Would this include your exhaust systems as well?
#13
Rennlist Member
Join Date: Feb 2011
Location: Mostly in my workshop located in Sweden.
Posts: 2,226
Received 442 Likes
on
244 Posts
[QUOTE=merchauser;14671185]
I wonder why Mr. Brown is so shy he will not provide us with a price list.
http://www.precisionmtrwerks.com/products/products.htm
[[color=#222222]Do you have a link and price list? /QUOTE]
+1
photo and price for the protection plates
+1
photo and price for the protection plates
http://www.precisionmtrwerks.com/products/products.htm
#15
[QUOTE=Strosek Ultra;14671205]
ya, we need to update that site..... but man, finding free time to do it... LOL.
I wonder why Mr. Brown is so shy he will not provide us with a price list.
http://www.precisionmtrwerks.com/products/products.htm
http://www.precisionmtrwerks.com/products/products.htm
ya, we need to update that site..... but man, finding free time to do it... LOL.