PSD flush using Bosch hammer
#1
Three Wheelin'
Thread Starter
PSD flush using Bosch hammer
I have read the posts about flushing PSD without a hammer tool.
can anyone refer me to posts or tutorial about flushing with the bosch tool
or do the prompts from the hammer tell you all you need to know?
can anyone refer me to posts or tutorial about flushing with the bosch tool
or do the prompts from the hammer tell you all you need to know?
#2
Only two options given on the PSD portion on the Hammer.
1. Bleed
2. Transverse locking
Do the bleed button, then open your valves. Bleed for a bit and shut the valve and then click stop. Keep the res filled up as you are doing this, you don't want it to run out. Do this until the color is nice and new.
1. Bleed
2. Transverse locking
Do the bleed button, then open your valves. Bleed for a bit and shut the valve and then click stop. Keep the res filled up as you are doing this, you don't want it to run out. Do this until the color is nice and new.
#3
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,328
Received 1,543 Likes
on
1,007 Posts
I find that I prefer the non-Hammer method to the Hammer method.
#5
#6
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,328
Received 1,543 Likes
on
1,007 Posts