Speedtoys

All gauges cept tach work.

Batt full, everything lights up.

Now no start. No click, voltage draw/drop, nothing.


WTH....

83 5spd

Speedtoys

First test will be to see if I get 12v at pin14 at bay connector. Check health of ign switch.

Rob Edwards

Is that with the new gauge cluster PCB board thingees in it?

Speedtoys

No volta at pin turning key. Giving pin 12v turn starter.

5spd has no relay only jumper.


Bad ign switch. Boo. Not driving most of THIS week.

Speedtoys

Yes, but thats not related to the ign.

Tech still doesnt work...likely a signal issue. Not sure how to debug that yet.
Speedo goes past 38mph now..it would stick there...turning the needle "moved the sticky bit" to 120mpg before the needle the shifted...****it, fine, it wont read past 120 now. BFD...
Oil pressure..bad sender syndrome...
Volt meter reads _perfectly_,..will post my 'how to tune meter' video tonight.

I have no dash illumination lights, or radio, or most of the time...clock.

Im going to chalk those up to the now highly likely bad ign switch. That would explain radio..and maybe dash lights, not sure tho.

I have one on a project car in Felton nearby, ill have in hand tomorrow.