928 Pro Tour LS3 / Z06 Build
#541
Rennlist Member
Thread Starter
Modified the mounts for the front grill and got everything to fit. Painted bottom portion of inter cooler black to blend in..........just noticed the paint drips, will be fixed.
#542
Rennlist Member
Thread Starter
Built rear tow hooks. I used both the shock bolt and sway bar link bolt as mounts. You could lift the car from these mounts.....a bit over kill.
Last edited by Blagave; 06-24-2018 at 08:56 PM.
#545
Rennlist Member
Thread Starter
The little bit I drove the car, I did go up and down a few driveways and had no scraps, where in the past some Porsche's and Ferrari's have touched, so hopefully things work out and you wont notice the skid plate unless your on your belly looking for it.
#547
Rennlist Member
Thread Starter
Front plastic wheel well covers were cracked in several areas, so I made aluminum replacements. Didn’t realize there isn’t a rear passenger cover for the gas tank, so I made one as well.
#550
Rennlist Member
Thread Starter
#552
Race Car
HOe-lleeee crap.
Can someone please provide the post numbers for:
1) the backstory on what prompted this extraordinary project, and
2) the backstory on O/Ps username
Being a candidate OB myself (do we have that defined for owners yet?....)...(edit: disregard)
Edit: Add.....I did a quick scroll of photos and not much readin'....was looking for something on reinforcing the sway bar mounting points given heim joints and all. Did you stick with factory arrangement?
oh, and what's the deal on the Euro in the background?
Can someone please provide the post numbers for:
1) the backstory on what prompted this extraordinary project, and
2) the backstory on O/Ps username
Being a candidate OB myself (do we have that defined for owners yet?....)...(edit: disregard)
Edit: Add.....I did a quick scroll of photos and not much readin'....was looking for something on reinforcing the sway bar mounting points given heim joints and all. Did you stick with factory arrangement?
oh, and what's the deal on the Euro in the background?
Last edited by SMTCapeCod; 07-02-2018 at 10:53 PM. Reason: additional Q
#553
Rennlist Member
Thread Starter
1) the backstory on what prompted this extraordinary project
Finished a few other builds and was Bored
2) the backstory on O/Ps username
If you drink Tequila, you will figure it out.
'....was looking for something on reinforcing the sway bar mounting points given heim joints and all. Did you stick with factory arrangement?
bottom chassis stiffener bolts into one of the lower trailing arm mounts on each side with longer bolt. Nothing was modified.
oh, and what's the deal on the Euro in the background
Long story, but was purchased a few years ago and have a love hate relationship with it.
Last edited by Blagave; 07-03-2018 at 12:16 AM.
#554
Former Vendor
You should fab up more sets of these and sell them as a complete replacement set... they look so nice.
#555
Rennlist Member
Thread Starter