When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Doing as many things as I can find while waiting for car to come back. I notched the back side of the front aluminum bumper for the air cleaner. I just welded a stiffener in and can check off the list.
Since I had the instrument cluster apart, I ordered SS bezel piece for the gauges from ferreus.com. The bezel needs to be bent a little to contour the cluster. It is held on by cutting slivers of high strength two side thin tape. I decided to also repaint the plastic housing face with Matt black paint and polished the inside of the plastic lens.
That really looks sharp. Do yourself a favor and replace your odometer gear while you are in there if you haven't already. The OEM ones crumble to dust. Roger and I both stock them.
I have LED light kits for the instrument cluster too, if you want.
That really looks sharp. Do yourself a favor and replace your odometer gear while you are in there if you haven't already. The OEM ones crumble to dust. Roger and I both stock them.
I have LED light kits for the instrument cluster too, if you want.
Again - really sharp instrument pod - nice job!
Thanks for the suggestions......both the gear and LED lights have been done a few posts ago.
Purchased a complete carpet kit from Gahh and started with door panels. I choose delete the coin holder on drivers door and made aluminum plate , which I epoxy in and then fiberglass bondo over. I forgot to take picture of sanded and finished.
02-12-2018, 07:42 PM
