When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Modified the mounts for the front grill and got everything to fit. Painted bottom portion of inter cooler black to blend in..........just noticed the paint drips, will be fixed.
I like the Mad Max action you got going underneath the splitter.
Keep up the work.
Dins
Thanks Dinsdale.....not exactly the look I wanted, but will have to do, unless I want a complete redesign of the engine install. If I had to do again, I would buy the LSA engine with charger built in.
The little bit I drove the car, I did go up and down a few driveways and had no scraps, where in the past some Porsche's and Ferrari's have touched, so hopefully things work out and you wont notice the skid plate unless your on your belly looking for it.
Front plastic wheel well covers were cracked in several areas, so I made aluminum replacements. Didn’t realize there isn’t a rear passenger cover for the gas tank, so I made one as well.
HOe-lleeee crap.
Can someone please provide the post numbers for:
1) the backstory on what prompted this extraordinary project, and
2) the backstory on O/Ps username
Being a candidate OB myself (do we have that defined for owners yet?....)...(edit: disregard)
Edit: Add.....I did a quick scroll of photos and not much readin'....was looking for something on reinforcing the sway bar mounting points given heim joints and all. Did you stick with factory arrangement?
oh, and what's the deal on the Euro in the background?
Last edited by SMTCapeCod; 07-02-2018 at 10:53 PM.
Reason: additional Q
1) the backstory on what prompted this extraordinary project Finished a few other builds and was Bored
2) the backstory on O/Ps username If you drink Tequila, you will figure it out.
'....was looking for something on reinforcing the sway bar mounting points given heim joints and all. Did you stick with factory arrangement? bottom chassis stiffener bolts into one of the lower trailing arm mounts on each side with longer bolt. Nothing was modified.
oh, and what's the deal on the Euro in the background Long story, but was purchased a few years ago and have a love hate relationship with it.
Front plastic wheel well covers were cracked in several areas, so I made aluminum replacements. Didn’t realize there isn’t a rear passenger cover for the gas tank, so I made one as well.
You should fab up more sets of these and sell them as a complete replacement set... they look so nice.
06-23-2018, 09:59 PM
