New 944 Turbo wastegate design for the top bulb
#16
4th Gear
Join Date: Mar 2004
Location: wiltshire/england
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
just what i need
Kevin ,did the wastegate project get off the ground, I am keen to buy one if they are available with 15-17 psi spring if that is possible?
Best regards, christian................
I have a friend flying out to the us very soon and would get him to collect it whilst in the USA saving postage of the international kind!
Best regards, christian................
I have a friend flying out to the us very soon and would get him to collect it whilst in the USA saving postage of the international kind!
Last edited by christians; 07-12-2017 at 10:24 AM. Reason: Grammer
#17
Racer
Thread Starter
Unfortunately not yet. 9 Products moved to a larger facility and he had a problem with the adjustable cam gears when they got sent out to get anodized, so he had to scrap the whole batch and make all new ones. I will get on his case about it. That would be a huge seller. If I had the machines that 9P has, I would have the coolest parts. They just got a 3D printer. I will post it as soon as I hear anything
#18
Hello Kevin, are they ready yet as I need to buy one off you urgently
I could do with a few different springs for 17, 18 & 19 psi
Could you drop me an email barrie_powell@btconnect.com
Cheers Barrie
I could do with a few different springs for 17, 18 & 19 psi
Could you drop me an email barrie_powell@btconnect.com
Cheers Barrie
#19
Racer
Thread Starter
No. God only knows when or if they will ever be ready. I'm just going to try and find a machine shop here in the states and see if they can make something similar. I'm not going to make it a dual port. Just a top that can be opened and stronger springs can be put inside. They really operate at a much slower tempo in Europe than America. Sorry man