Photo Request: Early 944 Aux. Air Valve Bracket
 

Hey everyone,

If anybody has a picture of their early 944 with the intake manifold off, specifically showing the aux. air valve and the bracket it is mounted on it would be a bit help. I took a bunch of photos before I took it all apart, but their are two additional metal brackets that go onto the bigger bracket (I think they help route the wires) that I can't get just right that were cut out of my photos. Funny how that always happens! Any help would be appreciated!

I think one of the screws holding on the small L-shaped mini-bracket also went missing, and I can't find it on any diagrams. If you have any clue what kind of screw that is it would also be a big help. Might be a 10mm hex head, but not 100% positive.

Search for '944 110 181 02' on this parts diagram and you will see how it gets put together. It doesn't show where the bracket gets mounted to, but the diagram shows everything oriented in the correct direction, so it should be fairly straight-forward.

You can see it a bit here. Hope this helps.

https://cimg0.ibsrv.net/gimg/rennlis...c9285f9ca6.jpg