Clearing out garage, some random parts for sale
Trying to make some space in the garage, I've got some random bits I need to get rid of.
Working Cycling valve off an 86 951, no cracks/leaks and works perfectly--40 bucks OBO shipped Factory 944S/S2 ignition control unit-- 45 bucks shipped. New set of late offset power inner tie rods, never installed and still in plastic--60 bucks shipped New set of late offset power inner tie rods, installed and used for about 1 week on the street before I decided I wanted to convert to early offset--45 bucks shipped Early offset 16x7 and 16x8 phone dials from an 86 951, some curb rash but all are straight and include color center caps and decent, new-ish summer tires with plenty of tread life left-- 400 local pickup, will ship for additional. The rest of the stuff below is just stuff I'm trying to part ways with, just make me an offer on them. two ICV off turbo cars, both work, unknown mileage. Turbo A/C condenser, need to test this as I'm unsure if it holds pressure Late A/C compressor, drier, and all lines Power steering reservoir and all hard + soft lines going to rack Stock 2.5 bar FPR off 86 951, no leaks stock Fuel pressure damper off 86 951, no leaks A set of factory M474 koni rear shocks off an 86 951, these are blown but can be rebuilt into double adjustable coil overs. Set of factory M474 koni front sealed struts, passenger side is blown, driver side is still good. Can be rebuilt into double adjustable coil overs. Holset HX35 12xm^2 hotside, has internal wastegate and includes the actuator Set of stock N/A springs Thanks |
Only the front Konis? I want rear coilovers :(
|
I have his wheels in my garage if anyone wants pics. :thumbup:
|
How much for the wheels shipped to 23111?
|
Shipping would most likely be around 150-200 dollars, but I really don't know since I've never shipped wheels before. I can get a quote for you tomorrow.
|
Originally Posted by admiralkhole
(Post 11048668)
I have his wheels in my garage if anyone wants pics. :thumbup:
|
No problem, I'll get them to you tonight after work.
I made the plate by the way! I had to slightly modify it, but it works great! |
Originally Posted by admiralkhole
(Post 11050381)
No problem, I'll get them to you tonight after work.
I made the plate by the way! I had to slightly modify it, but it works great! |
Originally Posted by Dougs951S
(Post 11049432)
Shipping would most likely be around 150-200 dollars, but I really don't know since I've never shipped wheels before. I can get a quote for you tomorrow.
|
How much for the lowering springs?
Thanks |
8 Attachment(s)
|
9 Attachment(s)
Attachment 1363050
Attachment 1363051 Attachment 1363052 Attachment 1363053 Attachment 1363054 Attachment 1363055 Attachment 1363056 Attachment 1363057 Bonus points if anyone can tell me the size of the sway bar in the background :jumper: Here's the plate....I modified it a little, then had to fit and adjust a few times. I didn't have to shim, everything lines up and gets appropriate travel with no rubbing or binding. I chipped away the hard insulation on the firewall and put the plate in its place. I used 1/8" mild steel...no problems what so ever. My pedal feel is solid, I highly recommend a plate for anyone running a stiffer clutch as a precaution. It was like night and day difference...I get zero firewall flex now, it's a great addition to the car :thumbup: I tried to get pics of it on, but there's way to much stuff in the way to get a clear shot. Attachment 1363058 |
Thanks for the pics, I think I'm going to pass.
Plate looks good. You dont have any binding issues? Feel free to PM. |
I am in need of a rear Phone dial, could use a whole set though. Might be a perfect time to powder coat white to go with the guards red 86 turbo.
I am in Denton TX, so I could pickup local. Will a full set fit in back with blown rear shocks ? If not then I can bring the Range Rover. If not, I have a set of shocks to put on :) If these are still available in a week or 2 when I get some huge cash, I will take them |
The wheels are in Copperas Cove. Bring the 944 and come kick it with us! We could have a little get together.
Also, I think powder coating them bronze or gunmetal would look great on a guards car. |
All times are GMT -3. The time now is 04:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands