Removing rear reflector panel
#1
Rennlist Member
Thread Starter
Join Date: May 2006
Location: SE Michigan
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have one of those non-factory reflector panels (not sure that is the proper name) between my taillights on my 951. It is red plastic and says "porsche". I am not super fond of it, and would like it gone. Before I take apart my car, does anyone know how it is attached. Were holes drilled in the car to install it? If so, will my license plate cover them? I can live with it, if I have to.
It is winter and cold outside, and I figured I would ask here before going in the garage. Thanks.
It is winter and cold outside, and I figured I would ask here before going in the garage. Thanks.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#3
Unbannable
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My understanding is that they are usually drilled. I'm not sure about where the holes are but, like onspeed suggested, if you pull the carpet you'll probably find out.
BB.
BB.
#4
Today I got
My Custom Title
Rennlist Member
My Custom Title
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Where's that old thread where the guy covered up the drill holes with girly silhouette stickers?
#5
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, there are holes for mounting it. 4 of them. The panel is strictly an after-market part. If it has lights inside, there may be a 5th hole. Most installations I've seen, the wiring is passed through the license plate frame mounting hole.
No, the license plate assembly won't cover the holes.
If the holes were drilled carefully, you might be able to install blind grommets in them to prevent water from entering through the holes. True fix would be to have the holes welded shut and refinish the paint.
Then sell the panel. People pay good money for them, especially the lighted ones.
Or you could learn to love it.
Darrell
No, the license plate assembly won't cover the holes.
If the holes were drilled carefully, you might be able to install blind grommets in them to prevent water from entering through the holes. True fix would be to have the holes welded shut and refinish the paint.
Then sell the panel. People pay good money for them, especially the lighted ones.
Or you could learn to love it.
Darrell
Trending Topics
#9
Three Wheelin'
Join Date: Aug 2007
Location: Upton, Massachusetts
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yeah those panels are fugly as hell and usually faded.
They drill 4 good size holes, maybe 5/16. Too far for the license plate to cover it. I just used plastic push pins (commonly used to hold on wheel well liners ect) and all is good.
They drill 4 good size holes, maybe 5/16. Too far for the license plate to cover it. I just used plastic push pins (commonly used to hold on wheel well liners ect) and all is good.
#10
Rennlist Member
Thread Starter
Join Date: May 2006
Location: SE Michigan
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks for all the input. My panel is the non-lighted kind, and it is in very good shape. I guess I will leave it on, I really don't want holes showing. I will see if I can "learn to love it". I don't hate it, I just like the cleaner look without it.
#11
![Talking](https://rennlist.com/forums/images/icons/icon10.gif)
Well, not quite right.
But....
When I boght my car it had that rear reflector on it (and red bumper pads
![surrender](https://rennlist.com/forums/graemlins/surrender.gif)
![](http://farm4.staticflickr.com/3551/3474164843_036db10640_b_d.jpg)
When I pulled the reflector off. (Mounted with 4 holes drilled through the real panel). I found that the car had "mudflap" girls on either side of the plate..UNDER THE PAINT
![soapbox](https://rennlist.com/forums/graemlins/soapbox.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![](http://farm5.staticflickr.com/4071/4390809150_b4e9775b0d_b_d.jpg)
Fortunately the holes are easy to fill in and repaint that rectangular area without it looking obviously repainted.
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
The back of the car now.
![](http://farm6.staticflickr.com/5220/5538164575_b77b817e1a_b_d.jpg)
#13
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you're ambitious, you could add lights to the panel. Right now, mine is connected to the parking lights but I'm thinking or re-wiring it to the brake lights like Grandpa#3 said.
Just my 2 cents worth!
Darrell
#15
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
FWIW, I didn't mind my rear reflector panel. It was lighted. I removed it for 3 reasons.
1. It is a surprisingly heavy part and I wanted to run a much lighter car.
2. It had warped over time and didn't fit totally flush.
3. Didn't like the "busy" look with the "Hey look at my PORSCHE!" lettering on it.
1. It is a surprisingly heavy part and I wanted to run a much lighter car.
2. It had warped over time and didn't fit totally flush.
3. Didn't like the "busy" look with the "Hey look at my PORSCHE!" lettering on it.