18" 3-piece forged Phonedials to be produced
03-10-2013, 03:31 AM
#31
This might be a little OT, but I've seen larger diameter 3 piece phonedials on some other makes outside of the US and have wanted a set ever since.
I don't think they were ever made in our bolt pattern though. It's probably for the best since I have too many sets of wheels as it is for a car I don't drive.
I don't think they were ever made in our bolt pattern though. It's probably for the best since I have too many sets of wheels as it is for a car I don't drive.
04-29-2013, 01:30 PM
#33
Rennlist Member
Thanks TheBlau. 
We have continued momentum on this project, and look forward to validating 944/951 fitment with the prototype. 928 fitment is off to a good start, so thing are looking promising!
We have continued momentum on this project, and look forward to validating 944/951 fitment with the prototype. 928 fitment is off to a good start, so thing are looking promising!
04-30-2013, 10:14 AM
#37
Instructor
Join Date: Oct 2009
Location: Casper, Wyoming
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
05-01-2013, 11:08 AM
#39
Rennlist Member
Join Date: Feb 2009
Location: Mississippi
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
Looking great Jadz928. Just remember, there are more 944s than 928s out there, don't forget your poor cousins.
Looked back through the thread but must have missed it, what is the estimated price tag?
Looked back through the thread but must have missed it, what is the estimated price tag?
05-01-2013, 11:39 AM
#40
05-01-2013, 08:16 PM
#41
Rennlist Member
Price is not set, but will be custom design boutique pricing. My goal is to do much better than Fuch replicas (fuchsperformance).
Hope to make it it work w/o spacers, but the design and what look right on the frontside will dictate what's needed on the backside.
Thanks for all your interest. I will try to get back regularly to answer questions.
06-01-2013, 10:47 AM
#43
Rennlist Member
Project update
Average weight 26.5# (at this point in the project, not final weight)
___________________________________
Our fitment study is nearing completion, and it looks like ya'll will have fitment very similar to the magnesium Cup Phone Dials!
Right now the rear fitment is exactly the same 9" ET57, front is 8" ET57.
For those wanting wider, there are 9.5" ET50 and 10.5" ET63 options.
Note: offset may change slighty, possibly - ET 2/3mm (very minor changes at this point)
Here's some pics of the prototype wheel mounted on my S4:
___________________________________
Our fitment study is nearing completion, and it looks like ya'll will have fitment very similar to the magnesium Cup Phone Dials!
Right now the rear fitment is exactly the same 9" ET57, front is 8" ET57.
For those wanting wider, there are 9.5" ET50 and 10.5" ET63 options.
Note: offset may change slighty, possibly - ET 2/3mm (very minor changes at this point)
Here's some pics of the prototype wheel mounted on my S4:
