Crunky

I want to see some pictures of cars with gutted interiors. I have decided to continue to strip down my car, and I want some ideas. Mainly I am debating what to do with the dash.

DanR

here is my track car

xsboost90

pics of our lemons car.

DanR

did you fabricate the cage yourself?

Crunky

thanks Dans dudes. I like that switch panel you have where the center console was DanR. I'm thinking of doing something similar for my early car. what did you guys do with all the wiring for the ac controls, and stuff that were in the center console? just tuck em back under the dash somewhere?

DanR

most of the wires were for the radio which I either remover or tucked up out of the way.

xsboost90

our cage was built by one of our drivers brother in law who teaches chassis building in Lima.

AlpharettaRK

Here's mine. Standard half dash. In the interest of recycling, I used the edge molding from the door jambs to cover the bare metal edge after cuting the dash. The gauge panel in the place of the center vent is made from the interior quarter panel trim.

Cheers
Randy

[IMG][/IMG]

pontifex4

Dan, what do the wires to the rear extinguisher canister do?

HJK

You asked for it !

HJK

and more, it all started for fun and now we got motec and all new wiring and map sensor and throttle position sensors etc.... ah yo...

HJK

and todays, fire extinguisher going in, switches being done.

DanR

the red one is the remote pull lever on my center console and the black one is the tubing which carries the foam. I have a nossle again on the center console pointing at the jewels and the others under the hood aimed at the fuel rail

DanR

HJK, that is a really nice cage!!!! What class will you be running it in?

HJK

Its for Super Car Thailand after I've done the turbo engine. For now it will trundle in Bangkok Classic racing..... cage is from www.customgages.co.uk shipped as puzzle to Thailand.