xsboost90

our car has weltmeister 250lb front springs that are about 1" lower, i believe the rear is stock height. Stock front swaybar and a 14mm factory rear turbo sway- maybe 16mm- only alignment work we did was drop the front camber in as far as possible. Car was awsome on the track and tire wear was minimal. We may need to do some home brew alignment now that the car has been all apart etc..

Dilberto

That's total BS.....LeMons organizers labeled you as sandbaggers. Tear it up, @ChumpCar!

carlege

Hows the Kevlar belt going?

pontifex4

Skip, while you're over here with the zombie thread revivers, you should update your sig line!

carlege

Done

xsboost90

wow- car has been sold since last summer. I've already built two spec cars since then. Kevlar belt- we had the same belt on three different motors in the dragon, they are awesome.