Large Bosch Fuel Pump Flow Rate ?
Bosch part# 0 580 254 942
Anyone know the rate of this pump. |
David,
I took a Bosch 0 580 464 042 out of my S2. (Could you have read the number wrong? They are hard to see.) It flowed 750cc in 30s when i tested it, which is spec for the late pumps. Earlier ones pushed 850cc/30s. Late pumps have a green band around the body. Edwardo |
Nope, correct number, it is sold by Lindsey Racing and was recommended to them by Motec, but they did not know the flow rates.
The pump is a good bit larger than stock unit, but still bolts right up with some shoe horning on the inlet hose. It is silver with a blue plastic band around it. Is stock unit on some 12 cylinder cars, so flow shoud be alot just wondering how much. |
I'm aware this is super old, but most specs I find on this are 225-250LPH. Its a step below the 044.
|
Back from the dead...
I found this while I was poking around for similar info. I don't guaranty its accuracy, but it sure looks official. http://www.lucasinjection.com/_borders/fuelpumps.pdf |
FYI, I have a used Bosch -044 pump with all the fittings for all 944/968/951. The pump setup was purchased from Lindsey is in good working condition and was used in my track only car for 3 years or ~2000 miles.
Asking $135+shipping. |
Thanks for the info guys 👍 What I can say is that pump has worked fine for the past 17 years @ 340 rwhp. I purchased an 044 from Lart some years back but not found the need to install, probably will some day. :burnout:
|
All times are GMT -3. The time now is 06:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands