Motors / wheels for sale
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Motors / wheels for sale
I just posted some stuff in the classifieds. I am located outside of Boulder CO. Shipping the engines would require some expense for crating and possibly pickup. I may however be driving to the Chicago area with a trailer over Thanksgiving so something might be worked out.
here is the ad text:
1991 944S2 motor, great condition. Accessories negotiable. No wiring harness, no oil cooler, no AFM. Great compression, rebuilt head. $2000 for long block with intake/exhaust.
944 wheels: 16' forged 'flats' late offset, 16x7,8" silver finish. $250 including centercaps.
944 Turbo S forged clubsport wheels. 16x7,9" Beat up and oxidized, for track use or restoration/repair. $350 for all four. $345 for just the 9" rears.
944 Turbo factory replacement engine with 20K miles. Short block only. Good compression. Consists of block, crank, rods, pistons, balance shafts. factory assembled. $2500. I have reciepts for the engine replacement, block has a replacement engine block code. The price is not cheap but great compared to rebuilding a 951 motor (with a hone and oversize pistons.) Plus you can sell whatever you have left over.
Thanks,
-Joel.
here is the ad text:
1991 944S2 motor, great condition. Accessories negotiable. No wiring harness, no oil cooler, no AFM. Great compression, rebuilt head. $2000 for long block with intake/exhaust.
944 wheels: 16' forged 'flats' late offset, 16x7,8" silver finish. $250 including centercaps.
944 Turbo S forged clubsport wheels. 16x7,9" Beat up and oxidized, for track use or restoration/repair. $350 for all four. $345 for just the 9" rears.
944 Turbo factory replacement engine with 20K miles. Short block only. Good compression. Consists of block, crank, rods, pistons, balance shafts. factory assembled. $2500. I have reciepts for the engine replacement, block has a replacement engine block code. The price is not cheap but great compared to rebuilding a 951 motor (with a hone and oversize pistons.) Plus you can sell whatever you have left over.
Thanks,
-Joel.
#4
Hey Man
Rennlist Member
Rennlist Member
Originally Posted by vette4lyfe
damn, if one of those were an NA engine id drive to colorado to get it..
#6
Hey Man
Rennlist Member
Rennlist Member
Originally Posted by deni durrell
um, it *is* an NA engine...
STEVE you da MAN. we will need to talk later - when i figure out the status.
STEVE you da MAN. we will need to talk later - when i figure out the status.
#7
Race Car
what do you mean by "accessories" on the engine? i may be interested in a swap.
Trending Topics
#9
Addict
Rennlist Member
Rennlist Member
Thread Starter
Accessories: PS Pump, Alternator, AC Compressor. I also have a bellhousing, flywheel and clutch (condition unknown) and a DME. In addition to what I have, for a swap you'd need an oil cooler, AFM, wiring harness, and a few odds and ends. You could also use an aftermarket oil cooler and a megasquirt rather than bother with the factory stuff.
-Joel.
-Joel.
#11
Race Car
Join Date: Jun 2003
Location: Albany, CA: celebrating 100 years of independence from Berkeley, CA
Posts: 4,887
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by tod84944
Send me a price for all 4 turbo S wheels w/shipping to 37072
#12
Race Car
hmm, i already have the ps pump, oil cooler, alternator, and don't need the a/c compressor. just need the DME and the AFM. let me do some research and i'll let you know. are you open to offers?
#13
Banned
Join Date: Feb 2004
Location: In self-imposed exile.
Posts: 14,072
Likes: 0
Received 8 Likes
on
7 Posts
N/A & turbo blocks are the same AFAIK - the head is different on the turbo (has the ceramic liner on the exh. ports & sodium filled valves), etc.
I'm looking for another block if anyone's got one - preferably one with a crank. I ended up swapping away my spare. . . 3-liters considered.
I'm looking for another block if anyone's got one - preferably one with a crank. I ended up swapping away my spare. . . 3-liters considered.
#14
Done With Sidepatch
Rennlist Member
Rennlist Member
Mother of #*$%^@...That is a very reasonable price for the 951 engine. I paid $2252 Cdn to my local Por$che dealer for oversize pistons. I'll never forget that number as long I as roam the Porsche kingdom.
I don't think that will last long Joel.
I don't think that will last long Joel.
#15
Racer
Join Date: Sep 2005
Location: Bay Area, California
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
I am very interested in the 16"x7" and 16" x 8" forged flats for $250 including center caps. Please send me some pictures to Litespeeds@hotmail.com when you get a chance. Thanks.
I am very interested in the 16"x7" and 16" x 8" forged flats for $250 including center caps. Please send me some pictures to Litespeeds@hotmail.com when you get a chance. Thanks.