Rennlist - Porsche Discussion Forums - 924 wheels 4x108 what is possible?

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)

- 924 and 931 Forum (https://rennlist.com/forums/924-and-931-forum-68/)

- - 924 wheels 4x108 what is possible? (https://rennlist.com/forums/924-and-931-forum/1064646-924-wheels-4x108-what-is-possible.html)

pa951

04-19-2018 04:07 PM

924 wheels 4x108 what is possible?

Looking to buy a set of 16” wheels for my 83 924

i don’t find much wheels. But Found a set 8j et25 will those rub on in or outside or a good fit?

more people here who tried aftermarket wheels?

mel_t_vin

04-22-2018 04:25 PM

If not mistaken, the OE wheels for your car were 6" x 14", or 15", with an ET of ~52mm. That being the case, these wheels with an ET 25 will be pushed out and sit closer to the fender lip by more than 27mm.

Will they rub? No idea...depends on your particular chassis [no two are exactly the same], ride height, and suspension geometry. As your car sits now, is there 27mm of clearance to the fender lip?

All times are GMT -3. The time now is 03:30 PM.