Wanna switch your boxter 7" for 6" wheels?
#1
Instructor
Thread Starter
Join Date: Apr 2004
Location: St. Petersburg, Florida
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Wanna switch your boxter 7" for 6" wheels?
I have heard you 14 guys run 6" wheels all around for the best setup.
I have also heard that many of you have changed to late offset wheels....
....ok, here goes...
I have a set of Boxter wheels on my 944 - 7 rear, 6 front. I would like 7 all around (factory spec). Anyone have these wheels and wanna swap? They come up cheap on ebay all the time (mine were 375 delivered...with great rubber!)
mtbrinson@hotmail.com or pm me.
I have also heard that many of you have changed to late offset wheels....
....ok, here goes...
I have a set of Boxter wheels on my 944 - 7 rear, 6 front. I would like 7 all around (factory spec). Anyone have these wheels and wanna swap? They come up cheap on ebay all the time (mine were 375 delivered...with great rubber!)
mtbrinson@hotmail.com or pm me.
#2
Three Wheelin'
Join Date: Nov 2001
Location: Livermore, California
Posts: 1,781
Likes: 0
Received 0 Likes
on
0 Posts
That would look awesome I think. However the "standard" 914s had 4 lug hubs. Except the 914-6. So I guess finding someone to trade with may prove difficult. I would cruise over to 914club.com (or whatever it is) and try my luck there.
Hope this helps
Hope this helps
#3
Instructor
Thread Starter
Join Date: Apr 2004
Location: St. Petersburg, Florida
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info.
I have heard of several guys that did the lug conversion with bolt-on spacers.
Gives them lots of options for aftermarket porsche wheels.
I have heard of several guys that did the lug conversion with bolt-on spacers.
Gives them lots of options for aftermarket porsche wheels.