930S Cab door gaps
#1
Rennlist Member
Thread Starter
930S Cab door gaps
Have been hunting for a 930S cab. I need some guidance from the experts!!
The two cars I have looked at ( Cabs, low mileage, no mods etc) have horrible gaps at the doors., The rear door upper gap is a good 1/8 wider than the gap mid door to lower door. Same issue with upper gap front area of door. Gap has been 3/16 - 1/4 inch wider than gap mid door / lower door. Also several I have looked at have horrible gaps with the front fenders around A pillar - these are are factory slantnose not aftermarket. Frunk lids/ front hoods/headlights have good gaps, Doors close perfectly with the ping sound.
My questions:
1) Are all 930S cabs from the factory with poor panel fitment?
2) Is it a fluke that the two I have looked at both have these poor fitting panels?
3) Are the cab bodys tweaked which is causing the poor fit?
4) tops is opening a closing fine so appear to be within spec?
5) no sign of accidents or body damage on either car. Paint meter perfect on each panel etc.
Sample of poor fit:
All comments appreciated. If panel fit is my OCD issue - would looking at 930S coupes resolve the fit concern?
Thanks, Speedster
The two cars I have looked at ( Cabs, low mileage, no mods etc) have horrible gaps at the doors., The rear door upper gap is a good 1/8 wider than the gap mid door to lower door. Same issue with upper gap front area of door. Gap has been 3/16 - 1/4 inch wider than gap mid door / lower door. Also several I have looked at have horrible gaps with the front fenders around A pillar - these are are factory slantnose not aftermarket. Frunk lids/ front hoods/headlights have good gaps, Doors close perfectly with the ping sound.
My questions:
1) Are all 930S cabs from the factory with poor panel fitment?
2) Is it a fluke that the two I have looked at both have these poor fitting panels?
3) Are the cab bodys tweaked which is causing the poor fit?
4) tops is opening a closing fine so appear to be within spec?
5) no sign of accidents or body damage on either car. Paint meter perfect on each panel etc.
Sample of poor fit:
All comments appreciated. If panel fit is my OCD issue - would looking at 930S coupes resolve the fit concern?
Thanks, Speedster