Piston/cylinder question
08-29-2005, 12:34 AM
#1
Pro
Thread Starter
Join Date: Sep 2004
Location: Marietta, Georgia
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
Piston/cylinder question
I picked up a set of pistons/cylinders from an old auto shop that that is closing down. I don't know exactly what they are but the price was right (FREE!). Crosshating still evident and no ridge at the top . The markings are as follows:
On the cylinders:
MAHLE D the D is followed by 2 dots.
95ZN1W 4 there are 2 plus signs(++) above the W
The pistons have no markings, though they are forged.
Just curious as to what I have had fall into my lap!
On the cylinders:
MAHLE D the D is followed by 2 dots.
95ZN1W 4 there are 2 plus signs(++) above the W
The pistons have no markings, though they are forged.
Just curious as to what I have had fall into my lap!
08-29-2005, 11:55 AM
#3
Pro
Join Date: Jun 2001
Location: Oak Park, CA
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
How can you take something as beautiful as a 911 and put something as pug-ugly as a pug in it? (For what it's worth, we just brought home a 7 week old pug yesterday.)
Jay
Jay
08-29-2005, 12:24 PM
#4
Drifting
95 - sounds like 3.2 Carrera's -
if so - worth a few hundred $'s - call EBS Racing - they are always looking for Cylinders & pistons - they will tell you what they are worth.
if so - worth a few hundred $'s - call EBS Racing - they are always looking for Cylinders & pistons - they will tell you what they are worth.
08-29-2005, 05:29 PM
#5
Pro
Thread Starter
Join Date: Sep 2004
Location: Marietta, Georgia
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
Congrats on the newly arrived Pug. 24/7 comic relief and absolutely, totally untrainable! Even with that I wouldn't be without one.
I'll post some pics of the pistons/cyl's ASAP.
I'll post some pics of the pistons/cyl's ASAP.
