Driver side miiror on 1988 Carerra
#1
Advanced
Thread Starter
Join Date: Jul 2009
Location: U.P. of Michigan
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Driver side miiror on 1988 Carerra
The glass of the mirror falls out of the frame. I tried to gently/firmly push it back into the housing and it stays for a bit and then falls out again. The wiring is still attached and prevents the glass mirror from falling out complete. It hangs by the wiring. Any advice how to get the mirror glass to stay in the housing?
Thanks,
Dwight
Thanks,
Dwight
#3
Rennlist Member
If your mirror looks like the one pictured by AG81, there should be a hole in the bottom center of the mirror housing that you stick a small flat blade up into to rotate the retaining ring which captures the ears he has identified with the red arrows.
#4
Rennlist Member
76FJ55.....Thank you.
I got a call and did not elaborate prior to posting.........
#5
Advanced
Thread Starter
Join Date: Jul 2009
Location: U.P. of Michigan
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Mirror issue
The picture is exactly my mirror. So after I psuh the mirror pegs back into the holes I should inset something to rotate the housing and that will secure the mirror?
Thanks,
Dwight
Thanks,
Dwight