I need some assistance if there are any members using "PHOTOSHOP" ???
#1
Rennlist Member
Thread Starter
I need some assistance if there are any members using "PHOTOSHOP" ???
Guys,
This is a World-Wide Porsche internet site so I'm thinking there probably are numerous members that use "Photoshop".
I'm reaching out to those of you that use it for your assistance.
I would love to get the general idea of what my 2021 Racing-Yellow GT4 would look like with the following additions.
So, guys, would one of you help me with this ???
Here's a side picture as I built it on the Porsche Home Page.
I would Really-really like to see what it would look like with the following additions.
These Side-Graphics in Black:
Change the Racing Yellow "Side-Scoops" to the OEM Black like in the picture below as an example:
My thanks guys,
Terry
This is a World-Wide Porsche internet site so I'm thinking there probably are numerous members that use "Photoshop".
I'm reaching out to those of you that use it for your assistance.
I would love to get the general idea of what my 2021 Racing-Yellow GT4 would look like with the following additions.
So, guys, would one of you help me with this ???
Here's a side picture as I built it on the Porsche Home Page.
I would Really-really like to see what it would look like with the following additions.
These Side-Graphics in Black:
Change the Racing Yellow "Side-Scoops" to the OEM Black like in the picture below as an example:
My thanks guys,
Terry
#3
Rennlist Member
Terry, what you’re asking for really isn’t that easy.
You’d have to bend the graphics to apply them to the Porsche configurator photo after cleaning them up and colour matching them, on top of that the resolution of your sample images are quite low (they look like screen grabs). So you’re not really giving enough to go on.
Here’s the decal image I found on line in higher res, and I tried darkening the vent but it too looked poor because of the photo quality and angle.
You’d have to bend the graphics to apply them to the Porsche configurator photo after cleaning them up and colour matching them, on top of that the resolution of your sample images are quite low (they look like screen grabs). So you’re not really giving enough to go on.
Here’s the decal image I found on line in higher res, and I tried darkening the vent but it too looked poor because of the photo quality and angle.
The following 2 users liked this post by UncleDude:
997usa (03-14-2021),
tigerhonaker (03-15-2021)
#4
Rennlist Member
Thread Starter
Terry, what you’re asking for really isn’t that easy.
You’d have to bend the graphics to apply them to the Porsche configurator photo after cleaning them up and colour matching them, on top of that the resolution of your sample images are quite low (they look like screen grabs). So you’re not really giving enough to go on.
Here’s the decal image I found on line in higher res, and I tried darkening the vent but it too looked poor because of the photo quality and angle.
You’d have to bend the graphics to apply them to the Porsche configurator photo after cleaning them up and colour matching them, on top of that the resolution of your sample images are quite low (they look like screen grabs). So you’re not really giving enough to go on.
Here’s the decal image I found on line in higher res, and I tried darkening the vent but it too looked poor because of the photo quality and angle.
No-Worries buddy and thanks for giving it a shot.
I don't have the ability to use Photoshop so I haven't really any idea on how hard what I was asking really was.
Thanks again,
Terry
The following 6 users liked this post by clutchplate:
FRIZ (03-15-2021),
Jeff Jones (03-15-2021),
jefflj (03-15-2021),
Paiceyfan (03-15-2021),
tigerhonaker (03-15-2021),
and 1 others liked this post.
#6
Rennlist Member
Thread Starter
clutchplate,
You my Good-Man are the $hit !!!
Can you by chance do the Black door-handles ???
If you can with the image with my Silver-Wheels I'll then have an Excellent idea of what mine will look like.
I also will have the below ..............
Terry
You my Good-Man are the $hit !!!
Can you by chance do the Black door-handles ???
If you can with the image with my Silver-Wheels I'll then have an Excellent idea of what mine will look like.
I also will have the below ..............
Terry
Last edited by tigerhonaker; 03-15-2021 at 01:22 PM.
#8
Rennlist Member
Nice job!
The following users liked this post:
tigerhonaker (03-15-2021)
#9
Rennlist Member
Thread Starter
Hey clutchplate,
I doubt we will ever meet in person as I think your located in sunny Gilroy CA.
Anyway what's most important to me is to make sure I immediately tell you I Very-very much appreciate your assistance.
Your the Man
Now thanks to you I do know what I have been dreaming up in my head in regards to my GT4.
This image shows me exactly what I wanted to know and it to me is going to be an "Awesome-Machine".
I just Hate to have any machine and it look exactly like any other from the Factory.
Now I know that what I want and what I have been practicing building is finally right.
Thanks again buddy your efforts from this fellow are 110% appreciated,
Terry
I doubt we will ever meet in person as I think your located in sunny Gilroy CA.
Anyway what's most important to me is to make sure I immediately tell you I Very-very much appreciate your assistance.
Your the Man
Now thanks to you I do know what I have been dreaming up in my head in regards to my GT4.
This image shows me exactly what I wanted to know and it to me is going to be an "Awesome-Machine".
I just Hate to have any machine and it look exactly like any other from the Factory.
Now I know that what I want and what I have been practicing building is finally right.
Thanks again buddy your efforts from this fellow are 110% appreciated,
Terry
Last edited by tigerhonaker; 03-16-2021 at 12:18 PM.
The following users liked this post:
tigerhonaker (03-15-2021)
#11
Rennlist Member
Thread Starter
Well assuming what Porsche has sent to Porsche of Nashville just maybe by the end of July or certainly August my old fanny will be sitting in the Driver's-Seat.
I can easily tell from your assistance on what I decided I wanted it to look like is going to work out perfect.
Hang-Tough buddy and be Safe,
Terry
Last edited by tigerhonaker; 03-15-2021 at 02:14 PM.