When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here are some pie charts of the build data I've collected so far. Sometimes, it's a little easier to dissect the data in a visual format. I'll try to remember to periodically update this thread with new charts. I still have a lot of entries with incomplete data so if you have a moment, please visit my thread or PM me with your information so I can update the build sheet. The build sheet is sorted by color, model, and then name if you want to look for your build on the sheet.
I would have spec'd Agate Gray too, had my wallet been a whole lot fatter... I had a hard time wrapping my head around stepping up to paying a $14K upgrade for an otherwise standard Porsche color....
I would have spec'd Agate Gray too, had my wallet been a whole lot fatter... I had a hard time wrapping my head around stepping up to paying a $14K upgrade for an otherwise standard Porsche color....
Pretty sure he was talking about an Agate GTS…which is a “standard” metallic upcharge.
My Agate Gray is really rare... one of the skinny slices with no arrow. If so, what's the other one?
The other colors that didn't get labeled are:
1. carmine red - .7%
2. dolomite silver - .2%
3. jet black metallic - .7%
4. agate grey metallic - 1.1% (as you pointed out)
For me, the most interesting stat is the 6MT vs PDK. I believe AP mentioned in one of the videos I've seen that he argued with PAG to keep the 6MT alive with the GT models and PAG resisted but ultimately gave him a chance and as it turns out, I recall him saying that the GT models (718 and 911) have a take rate of about 75% which is inline with what I'm seeing here.