When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm so glad you said something I was so panicked on the ride home but youre right its there...I may have my vendor just apply extra think PPF on the whole front fender..will see tomorrow
I did ppf and then added a ppf stripe similar to factory so I can peel and change the stripes once a year
It's finnaly done... Satin PPF, tint, windshield protection. CA central coast, natural habitat for the Spyder RS.
Absolutely incredible drive along the coast with the bikini top configuration. WIth some AC breeze it is not too hot.
Very surprised on the comfort level as well. Didn't feel much difference in comfort between this and my old GTS.
Holes in the bumper from the factory? I haven't seen that.
They aren't really holes but more like marks where the mounting screws are supposed to go. I wouldn't have noticed but my PPF has noticeable bumps where it stretches over these marks.
I thought someone started to install the front bracket and stopped.. it's annoying in that they are inconsistent. one of mine is deeper than the other..
Originally Posted by hk43
They aren't really holes but more like marks where the mounting screws are supposed to go. I wouldn't have noticed but my PPF has noticeable bumps where it stretches over these marks.
More like pre-formed dimples that get amplified by the paint in the case of jlee504. On a side note my paint was horrible. Sanding marks all over it and lots of nibs that were sanded down and not sanded down. It wouldn't surprise me if they are having an issue in the paint section of the assembly plant. It was one of the worst I've seen. My 991.1 GT3 did not have these same issues. Most are covered with the PPF and most people won't notice, but there are nibs that created a "bubble" in the film.
07-17-2024, 10:12 PM
